[cisco-voip] Cisco AS5400XM

Nate VanMaren VanMarenNP at ldschurch.org
Fri Oct 14 10:42:43 EDT 2011


Did the VGG-1T3 just never take off?

________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] on behalf of Lelio Fulgenzi [lelio at uoguelph.ca]
Sent: Thursday, October 13, 2011 6:55 PM
To: Mark Holloway
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco AS5400XM

D'oh! Missed those.

Sent from my iPhone

On Oct 13, 2011, at 8:10 PM, Mark Holloway <mh at markholloway.com<mailto:mh at markholloway.com>> wrote:

The VWIC modules are his voice T1 ports.  He would definitely need PVDM's.


On Oct 13, 2011, at 12:47 PM, Lelio Fulgenzi wrote:

I could be wrong, but as far as I understand, you don't need DSPs if you're doing VoIP only. Only if you're doing PSTN (PRI, FXO) or transcoding on the router itself. It doesn't look like you have any PSTN ports on order, that's why I ask.

Like I said, I could be wrong.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)


________________________________
From: "Kyle Sexton" <<mailto:ks at mocker.org>ks at mocker.org<mailto:ks at mocker.org>>
To: "Lelio Fulgenzi" <<mailto:lelio at uoguelph.ca>lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>
Cc: "Mark Holloway" <<mailto:mh at markholloway.com>mh at markholloway.com<mailto:mh at markholloway.com>>, <mailto:cisco-voip at puck.nether.net> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Thursday, October 13, 2011 2:58:30 PM
Subject: Re: [cisco-voip] Cisco AS5400XM

Cisco did come back with a quote for a Cisco 3925 as a potential
solution.  I've heard and spoke to people who have used the AS5400XM
device with an Asterisk PBX, but haven't heard any reports on the
3925.  Should I be concerned or does anyone have any experience with
this type of device as a gateway to Asterisk using SIP?

Quote included:

(1) Cisco 3925 w/ SPE100(3GE, 4EHWIC, 4DSP, 2SM, 256MBCF, 1GBDRAM, IPB)
(1) PVDM3-256 (256-channel high density voice and video DSP module)
(2) VWIC3-4MFT-T1/E1 (4-Port 3rd Gen Multiflex Trunk Voice/WAN
interface card - T1/E1)

They also said using using the AS5400XM with a DS3 I should be
concerned about more than 30 calls per second coming across the
system.  Has anyone has experience with that?

Thanks in advance, everyone has been very helpful so far.

Kyle Sexton


On Sat, Oct 8, 2011 at 1:23 PM, Lelio Fulgenzi <<mailto:lelio at uoguelph.ca>lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
> Cool, thanks. And, yeah, still no DS3 voice module, only ATM.
>
> Sent from my iPhone
> On Oct 7, 2011, at 7:08 PM, Mark Holloway <<mailto:mh at markholloway.com>mh at markholloway.com<mailto:mh at markholloway.com>> wrote:
>
> These days there may not be a compelling reason.  Several years ago there
> was no channelized DS3 module for the ISR that would support 27 PRI's for
> SIP/PRI termination. Does a module like that exist for the ISR Gen2?  As for
> an AS5400 with 8xT1 ports, there are definitely other options.
> On Oct 7, 2011, at 1:22 PM, Lelio Fulgenzi wrote:
>
> Just curious, in a few bullets, why would one choose the AS5400 over the new
> 3900 ISR? Is it capacity? Available protocols? Interface type?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Mark Holloway" <<mailto:mh at markholloway.com>mh at markholloway.com<mailto:mh at markholloway.com>>
> To: "Doug McIntyre" <<mailto:merlyn at geeks.org>merlyn at geeks.org<mailto:merlyn at geeks.org>>
> Cc: <mailto:cisco-voip at puck.nether.net> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> Sent: Friday, October 7, 2011 3:57:48 PM
> Subject: Re: [cisco-voip] Cisco AS5400XM
>
> Doug is right.  Back when I was supporting these we populated six slots of
> 108's and one channelized DS3 module.  It's been a while since I've spec'd
> these out, although those gateways are still cranking away.  They have
> up-times of 2+ years.  They run like a champ!
>
>
> On Oct 7, 2011, at 12:34 PM, Doug McIntyre wrote:
>
>> On Fri, Oct 07, 2011 at 01:59:36PM -0500, Kyle Sexton wrote:
>>> Thanks for verifying my configuration.  Contacted Cisco and they came
>>> back with different hardware than the list that I sent them:
>>>
>>> (1) AS54-DFC-8CT1 (Octal T1/PRI DFC Card)
>>> (1) AS5X-FC (Feature card with six PVDM DSP modules slots)
>>> (4) AS5X-PVDM2-65 (64-Channel Packet Voice/Fax DSP modules)
>>>
>>> I'm a little confused on the DSP differences, the list I sent to Cisco
>>> was for two "AS5400 108 Voice/Universal Port Feature Cards" and
>>> instead they send back a different feature card and some Voice/Fax DSP
>>> modules.
>>
>>
>> Probably because the AS54-DFC-108NP part is EOL'd..
>>
>> <http://www.cisco.com/en/US/prod/collateral/iad/ps505/ps507/prod_end-of-life_notice0900aecd804c6e98.html> http://www.cisco.com/en/US/prod/collateral/iad/ps505/ps507/prod_end-of-life_notice0900aecd804c6e98.html
>>
>> Replacement part # AS5X-PVDM2-64
>>
>> _______________________________________________
>> cisco-voip mailing list
>> <mailto:cisco-voip at puck.nether.net> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
>> <https://puck.nether.net/mailman/listinfo/cisco-voip> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> <mailto:cisco-voip at puck.nether.net> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> <https://puck.nether.net/mailman/listinfo/cisco-voip> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> <mailto:cisco-voip at puck.nether.net> cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
> <https://puck.nether.net/mailman/listinfo/cisco-voip> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



--
Kyle Sexton


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111014/7f2640d8/attachment.html>


More information about the cisco-voip mailing list