[cisco-voip] Big analog gateway?

[Jim McBurnett]

I agree... Remember to ask about the 4 pack bundle... It is the same price as 3...


Thanks,
Jim

Sent from my wireless handheld... Please excuse the typos.

-----Original Message-----
From: Lelio Fulgenzi [lelio at uoguelph.ca]
Received: Friday, 21 Oct 2011, 3:04pm
To: Matthew Saskin [msaskin at gmail.com]
CC: cisco-voip at puck.nether.net [cisco-voip at puck.nether.net]
Subject: Re: [cisco-voip] Big analog gateway?

VG224s are still the cheapest $/port solution out there.

If you have CallManager anyways, then you can simply tie them into that configuration. If you don't want to do that, you can go H323 for all ports and you don't need a call control mechanism I believe. Although it will be quite a few dial peers.

If you need PSTN access, then a small 2901 should do the trick. It can act as the gatekeeper as well I believe.



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)


________________________________
From: "Matthew Saskin" <msaskin at gmail.com>
To: "Wesley Schochet" <Wesley.Schochet at childrensmn.org>
Cc: cisco-voip at puck.nether.net
Sent: Friday, October 21, 2011 2:56:19 PM
Subject: Re: [cisco-voip] Big analog gateway?

Both audiocodes and quintum make fairly inexpensive devices to do larger scale analog to IP conversion.  On the cisco front, you can get pretty good FXS density with the EVM-HD module in an ISR/ISR G2 - should be 24 ports per EVM-HD module and you can put two into a 3845 as an example.  May not be the cheapest way to get ~50 analog ports however.

Matthew Saskin
msaskin at gmail.com<mailto:msaskin at gmail.com>
203-253-9571



On Fri, Oct 21, 2011 at 2:13 PM, Wesley Schochet <Wesley.Schochet at childrensmn.org<mailto:Wesley.Schochet at childrensmn.org>> wrote:
OK folks, in my hospitals, I have about 50 emergency phones, one for each department.  We are still primarily Avaya (I'm working on that), but I have a CUCM 8 cluster to service my fleet of 7925 wifi phones.  When you upgrade the Avaya, you have about 15 minutes of downtime while it reboots (yes, really and yes, this is current software).

The emergency phones are used for these planned outages and as a backup for unplanned outages.  Right now all of them are 1FBs from the telco (seemed like a good idea 15 years ago!).  Needless to say, this is dough we could be saving!

How do I service 50 analog phones in a relatively inexpensive way?   Why is the vg248 gone when I need it?  Anyone have a decent large scale analog sip gateway?

Or, do I convert them all to like 6901 or 6911s?  That ends up in the $150-200 range for the set and the DLU - plus a switch port if it's the 6901.

Thoughts?

Thanks!



Confidentiality Statement:
This email/fax, including attachments, may include confidential
and/or proprietary information and may be used only by the
person or entity to which it is addressed. If the reader of
this email/fax is not the intended recipient or his or her
agent, the reader is hereby notified that any dissemination,
distribution or copying of this email/fax is prohibited. If you
have received this email/fax in error, please notify the sender
by replying to this message and deleting this email or
destroying this facsimile immediately.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111021/4c2f08c4/attachment.html>