[cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

[Nate VanMaren]

The 6900s seem to really come into their own with CM 8.6 and 9.2.1

We ran 9.2.1 for a few months against CM 7.1.3 with no reported issues.  We're now running them against CM 8.6 and they're great.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rab
Sent: Thursday, September 01, 2011 12:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

Anyone else rolled out 9.2.1.0? 

Rolled it out on mass to a customer running CUCM8.0(3a). Now when they dial a number on their 69xx series phones and lift the receiver a message displays on the phone indicating 'maximum lines in use'. Rolled them back to previous version and they behave normally. :(

Does anybody have a recommendation for a stable firmware release on these handsets?





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.