[cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

[Dennis Heim]

That is related to that bug. Does that affect your firmware build?

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

317.569.4255 Single Number Reach
317.569.4201 Fax 
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rab
Sent: Thursday, September 01, 2011 3:18 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

Thanks Dennis, would that be related to the constant DTMF tone bug I saw whilst reading through the 'caveat' list?

TAC have provided us with a 'stable' 9.2.1 release to resolve the max lines in use issue.

Fingers crossed!!

On 1 Sep 2011, at 20:08, Dennis Heim <Dennis.Heim at cdw.com> wrote:

> Trying pressing the "*" while you are on a call.
> 
> Dennis Heim
> Network Voice Engineer
> CDW  Advanced Technology Services
> 10610 9th Place
> Bellevue, WA 98004
> 
> 317.569.4255 Single Number Reach
> 317.569.4201 Fax 
> dennis.heim at cdw.com
> cdw.com/content/solutions/unified-communications/
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate VanMaren
> Sent: Thursday, September 01, 2011 2:56 PM
> To: Rab; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug
> 
> The 6900s seem to really come into their own with CM 8.6 and 9.2.1
> 
> We ran 9.2.1 for a few months against CM 7.1.3 with no reported issues.  We're now running them against CM 8.6 and they're great.
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rab
> Sent: Thursday, September 01, 2011 12:11 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug
> 
> Anyone else rolled out 9.2.1.0? 
> 
> Rolled it out on mass to a customer running CUCM8.0(3a). Now when they dial a number on their 69xx series phones and lift the receiver a message displays on the phone indicating 'maximum lines in use'. Rolled them back to previous version and they behave normally. :(
> 
> Does anybody have a recommendation for a stable firmware release on these handsets?
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip