[cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

[Dennis Heim]

I talked to tac earlier this week. The fix is in 9.2.2, which is delayed until November. Rumor is there will be an ES that will fix it at some point prior to then.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

317.569.4255 Single Number Reach
317.569.4201 Fax 
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/


-----Original Message-----
From: Nate VanMaren [mailto:VanMarenNP at ldschurch.org] 
Sent: Thursday, September 01, 2011 4:53 PM
To: Dennis Heim; Rab; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

Hrm.  I guess our users aren't pressing *....

Is there a fix?

-----Original Message-----
From: Dennis Heim [mailto:Dennis.Heim at cdw.com] 
Sent: Thursday, September 01, 2011 1:09 PM
To: Nate VanMaren; Rab; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

Trying pressing the "*" while you are on a call.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

317.569.4255 Single Number Reach
317.569.4201 Fax 
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nate VanMaren
Sent: Thursday, September 01, 2011 2:56 PM
To: Rab; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

The 6900s seem to really come into their own with CM 8.6 and 9.2.1

We ran 9.2.1 for a few months against CM 7.1.3 with no reported issues.  We're now running them against CM 8.6 and they're great.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rab
Sent: Thursday, September 01, 2011 12:11 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 69xx SCCP 9.2.1.0 Firmware bug

Anyone else rolled out 9.2.1.0? 

Rolled it out on mass to a customer running CUCM8.0(3a). Now when they dial a number on their 69xx series phones and lift the receiver a message displays on the phone indicating 'maximum lines in use'. Rolled them back to previous version and they behave normally. :(

Does anybody have a recommendation for a stable firmware release on these handsets?





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip