[cisco-voip] Call Forward no Coverage

[Lelio Fulgenzi]

Are you using Unity Connection 7.0 or higher? If so: 

AdminGUI > System Settings > Advanced > Conversations 

Use Last (Rather than First) Redirecting Number for Routing Incoming Call [x] 

That should work. Unity 5 and higher should have it to I think, just not sure if and where. 

P.S. "datapac" around here is legendary... http://en.wikipedia.org/wiki/DATAPAC 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Neil O'Brien" <nobrien at datapac.com> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, September 6, 2011 3:43:25 PM 
Subject: [cisco-voip] Call Forward no Coverage 




Hi Guys, 



What I want to configure is this: 



· Call to DN1234 rings out and the CNFA settings are set to ring DN5678. If DN5678 doesn’t answer either, I want it to go to the voicemail of the originally dialled number, in this case DN1234. I thought Call Forward No Coverage did this but it seems this only works when Use Personal Preference is configured in huntgroup setup. 



Is there a way to do what I want to do?? 



As always, 


Thanks… 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110906/a055de6c/attachment.html>