[cisco-voip] 9971 Wireless recording with built in bridge

[Erick B.]

Right, I've been doing some more testing with a standalone AP also and
not seeing anything different. I just wanted to rule out production
wireless network, etc. I'm not seeing it attempt to send the recording
unlike with a wired connection.

Thanks

On Thu, Sep 8, 2011 at 1:58 PM, Joe Martini <joemar2 at cisco.com> wrote:
> I checked this on a 9971 and confirmed that recording doesn't work when the phone is using wireless.  I'm looking into the logs now to see if the phone purposely does this.  As for testing recording, you can set a phone to auto-answer, even though you can only listen to one stream at a time you can at least check to make sure the audio streams are sent to your destination.
>
> Joe
>
> On Sep 8, 2011, at 11:20 AM, Erick B. wrote:
>
> Anyone else trying to do call manager recording on a 9971 phone set up
> as wireless?  It works fine when the 9971 is on a wired connection. FW
> 9.2.1.
>
> Have built in bridge enabled and recording profile set, and using ZOOM
> recording (SIP trunk - Spanless).
>
> Does anyone know of a free/shareware recording package I can test with
> to see if it is ZOOM or the phone/CUCM?
>
> Thanks.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>