[cisco-voip] 'remote controlling phones

Stephen Welsh stephen.welsh at unifiedfx.com
Tue Sep 20 20:12:27 EDT 2011


Hi Erick,

In order to make sure you are following the right information for each UCM version the main page to start from is:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html

If you then goto the Cisco Unified IP Phone Services Application Development Notes for the relevant release, for example UCM 8.5 is: http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/8_5_1/xsi_dev_guide.html

In particular for pressing keys etc. you should refer to the Internal URI Section:
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/8_5_1/supporteduris.html

You do need to watch out for the new phone models 89xx & 99xx etc., the URI's are quite different for opening the Setting Page for example.

I'm curious as to your ultimate objective, is it purely a learning exercise, or do you have some objective?

I ask, because there are a lot of people stuck having to delete the ITL File on their IP Phones due to Security by Default in UCM 8.x

I've seen companies use different approaches to do this, some script others buy software, but in some situations the phones Authentication URL is broken and pushing commands to the phones web server doesn't cut it, so you might need a Plan B ;)

I have quite a lot of experience in this area and happy to discuss in more detail.

Thanks

Stephen Welsh
CTO, Unified FX
http://www.unifiedfx.com

On 20 Sep 2011, at 22:43, Wellnitz, Erick A. wrote:

Before anyone says “buy a product”,  I’m doing this as a learning exercise.  I WANT to do this myself so I can customize it to my exact needs.

Here’s a question I’ve been researching and can’t seem to find any documentation on.

There’s a url on the phone’s web interface which allows you to send xml messages to ‘control’ a phone.
(<CiscoIPPhoneExecute><ExecuteItem URL="' XXXXX'"/></CiscoIPPhoneExecute>)

For instance, I can send the XML to activate the speaker button or press a certain softkey.

Is there documentation anywhere for the different values of ‘XXXXX’ for different keys?

ERICK A. WELLNITZ
Network Engineer
Katten Muchin Rosenman LLP



===========================================================
CIRCULAR 230 DISCLOSURE: Pursuant to Regulations Governing Practice Before the Internal Revenue
Service, any tax advice contained herein is not intended or written to be used and cannot be used
by a taxpayer for the purpose of avoiding tax penalties that may be imposed on the taxpayer.
===========================================================
CONFIDENTIALITY NOTICE:
This electronic mail message and any attached files contain information intended for the exclusive
use of the individual or entity to whom it is addressed and may contain information that is
proprietary, privileged, confidential and/or exempt from disclosure under applicable law.  If you
are not the intended recipient, you are hereby notified that any viewing, copying, disclosure or
distribution of this information may be subject to legal restriction or sanction.  Please notify
the sender, by electronic mail or telephone, of any unintended recipients and delete the original
message without making any copies.
===========================================================
NOTIFICATION:  Katten Muchin Rosenman LLP is an Illinois limited liability partnership that has
elected to be governed by the Illinois Uniform Partnership Act (1997).
===========================================================


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110920/75fc6809/attachment.html>


More information about the cisco-voip mailing list