[cisco-voip] CMM with two CUCM clusters and MGCP

[Lelio Fulgenzi]

checking the release notes, it looks like this was made available in 6.0(1) 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_0_1/cucm-rel_note-601a.html#wp45126 

the document i checked earlier, 6.1 DN configuration guide, did not have the call forward unregistered parameter, that's why i said this. 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b03dn.html#wp1281526 

but since you've found it. you're great. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Ratko Dodevski" <rade239 at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net, "Pavan" <pav.ccie at gmail.com> 
Sent: Wednesday, 8 August, 2012 8:23:33 PM 
Subject: Re: [cisco-voip] CMM with two CUCM clusters and MGCP 

I also have CM v6.1 in our production and just saw that there is CFUR field on the device. Good thing is that we have CM6.1 for production and 8.6 for test (exacly the same as the customer :) ). 


Regards 


-- Ratko 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120808/134560a9/attachment.html>