[cisco-voip] voicemail pilot issue

[Robin Clayton]

CCM7.x
2811 - H323 Gateway.


Last week we had to move our Publisher to a new power feed so shut it down, calls to normal DDI's and Hunt's hoped over to the Subscriber.

However the main incoming DDI that points at a hunt pilot did not work.

Checking the Voice gateway the Dial Peers point to both CCM nodes..

Anyone got any bright ideas?

Cheers

Rob




=========================
Robin Clayton

Network Transition Manager
Richard Rose Federation
Richard Rose Central Academy
Victoria Place
Carlisle
Cumbria
CA1 1LY

Tel: 01228 822075
www: www.rrfa.org.uk



--------------------------------------------------------------------------------------------------------------

Important Notice:

This e-mail and any attachment are confidentialand may be privileged
or otherwise protected from disclosure. It is solely intended for the
person(s) named above. If you are not the intended recipient, any
reading, use, disclosure, copying or distribution of all or parts of this
e-mail or associated attachments is strictly prohibited. If you are not
an intended recipient, please notify the sender immediately by
replying to this message or by telephone and delete this e-mail and
any attachments permanently from your system.

The Richard Rose Federation<http://www.rrfa.org.uk>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120809/af1d0118/attachment.html>