[cisco-voip] Using 64kbps channels on a t3 as transport

[Craig Staffin]

Rather than doing it in "TDM" terms why not do it with VoIP?

You could setup dial-peers that point to the other 7206 and configure a 12
channel T1 on both ends.  Also if you need to allow custom signaling you
could use cisco's signaling passthrough (IE for Avaya or Nortel)


On Fri, Aug 10, 2012 at 12:53 PM, Joseph Mays <mays at win.net> wrote:

>  For transport between the 5400's and the 7206's on each end can we define
>> a PRI that uses one t1 on each AS5400 to connect to a PRI port on the
>> PA-MC-8T1 in each 7206?
>>
>
> And, finally critically, how do we virtually "cross connect" channels from
> a PRI port on the PA-MC-8T1 card in the 7206 to DS0 channels on t1 channels
> on the PA-MC-T3 card in the 7206?
> ______________________________**_________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/**mailman/listinfo/cisco-voip<https://puck.nether.net/mailman/listinfo/cisco-voip>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120810/7af7c7ca/attachment.html>