[cisco-voip] Time of Day Routing
dschulz
dschulz at skyline-ats.com
Tue Aug 21 12:23:01 EDT 2012
Yep... Just make sure the partition of the secondary dn is listed below the ToD partition on the CSS of the calling devices.
Dave
On Aug 21, 2012, at 12:16 PM, george.hendrix at l-3com.com wrote:
> I had to do a similar setup. I created a partition that’s active during closed hours/days and added a “duplicate” extension in this after hour partition and then set it for all calls to go to VM. Hope this helps.
>
> Bill
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Michael Dugan
> Sent: Tuesday, August 21, 2012 11:15 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Time of Day Routing
>
> Good Morning,
> We have an extension that uses TOD. What I can’t figure out is how it goes to voice mail during closed hours. Can anyone help me on this?
>
> Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120821/80d9a726/attachment.html>
More information about the cisco-voip
mailing list