[cisco-voip] CUBE and MS Lync

[Erick Wellnitz]

That was it!  Thank you!


On Tue, Aug 21, 2012 at 1:15 PM, Divin John <dijohn at cisco.com> wrote:

> it could be the toll fraud app :)
>
> I know its a nag.
>
> voice service voip
> ip address trusted
> ipv4 <lync-server>
>
> http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080b3e123.shtml
>
>
> On Tuesday 21 August 2012 at 11:22 PM, Erick Wellnitz wrote:
>
> > IOS version c3845-advipservicesk9-mz.151-4.M4, CM 6.1.3, Lync 2010
> >
> > We are only initiating calls from CUCM currently.
> >
> > I have used this document as a template:
> http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns728/ns784/8464511.pdf
> >
> > Okay...I have my CUBE set up as follows:
> > voice-card 0
> > dspfarm
> > dsp services dspfarm
> > !
> > !
> > !
> > voice service voip
> > allow-connections sip to sip
> > signaling forward none
> > sip
> > session transport tcp
> > header-passing
> > asserted-id pai
> > history-info
> > midcall-signaling passthru
> > privacy-policy passthru
> > !
> > voice class sip-profiles 3
> > request INVITE sip-header Diversion remove
> > !
> > sccp local GigabitEthernet0/0
> > sccp ccm 10.#.#.# identifier 1 priority 1 version 4.0
> > sccp
> > !
> > sccp ccm group 1
> > associate ccm 1 priority 1
> > associate profile 1 register LyncTranscode1
> > !
> > dspfarm profile 1 transcode
> > codec g729br8
> > codec g729abr8
> > codec g729ar8
> > codec g711alaw
> > codec g729r8
> > codec g711ulaw
> > maximum sessions 96
> > associate application SCCP
> > !
> > dial-peer voice 1000 voip
> > description from Cisco UCM to Lync outbound dial-peer
> > destination-pattern 3109
> > session protocol sipv2
> > session target ipv4:10.#.#.#:5068
> > session transport tcp
> > voice-class sip early-offer forced
> > voice-class sip profiles 3
> > voice-class sip block 183 sdp present
> > dtmf-relay rtp-nte
> > codec g711ulaw
> > !
> > dial-peer voice 1001 voip
> > description from Cisco UCM to Lync inbound dial-peer
> > session protocol sipv2
> > incoming called-number 3109
> > dtmf-relay rtp-nte
> > !
> > telephony-service
> > sdspfarm units 1
> > sdspfarm transcode sessions 128
> > sdspfarm tag 1 LyncTranscode1
> > max-ephones 1
> > max-dn 2
> > ip source-address 10.#.#.# port 2000
> > max-conferences 12 gain -6
> > transfer-system full-consult
> > create cnf-files version-stamp XXXX
> >
> > I have my SIP trunk pointed at the CUBE but I get a 403 Forbidden error
> when I try to make a call. From the ccsip debugs it looks like I'm having
> media negotiation issues even though my regions are set correctly.
> >
> > Could anyone shed some light on where I am going wrong?
> >
> > Thanks!
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net (mailto:cisco-voip at puck.nether.net)
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> > Attachments:
> > - ccsip.txt
> >
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120821/a52e40ad/attachment.html>