[cisco-voip] CUCM8.6-9.0 79xx phone compatiblity

[Lelio Fulgenzi]

i'd be interested in see any docs that say either of these phones don't work. although not officially supported, i don't think they write out support in the versions. just no new features, etc. 

typically, i would look to the compatibility matrix to see what the default load is for an endpoint for a particular version. if it was not there, than most likely it was not supported, i.e. it wouldn't work. 

i just checked, and the PDF seems a little different. it does not show the default loads for v9. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Michael Muscat" <michaelm at umcu.org> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, 22 August, 2012 7:21:42 PM 
Subject: [cisco-voip] CUCM8.6-9.0 79xx phone compatiblity 




I’m thinking about upgrading my existing CM7.1.5 to 8.6 or 9.0 shortly. The problem is that I have around 60 7912’s and a few 7940’s in place. From the docs I’m reading about the upgrades some say they are good and some say the 7912’s won’t work. Has anyone performed this upgrade and what is your experience with these devices? 



Thanks, 





Mike Muscat 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120822/d6509d12/attachment.html>