[cisco-voip] sending 999 calls via the FXO in both CUCM and SRST mode

[Norton, Mike]

Even if you were to manage to make the port be H.323, I'm not seeing what that would accomplish. You'd still need to do something in CUCM in order for CUCM to know to send the calls from certain phones to that specific H.323 gateway.

--
Mike Norton
I.T. Support
Peace Wapiti School Division No. 76
Helpdesk: 780-831-3080
Direct: 780-831-3076


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of abbas Wali
Sent: August-23-12 4:06 PM
To: Nate VanMaren
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] sending 999 calls via the FXO in both CUCM and SRST mode

Scott,

we want not to get more hardware or providers on this.

I heard somewhere, that you can configure a Voice Gateway such that one interface is controlled by MGCP another is H323 and so on.

so if I can somehow control that FXO on H323 then that can use the local dial peers no matter what.

So the million dollar questions becomes how to have this one FXO interface controlled by an H323 in an MGCP gateway!!!!!!!!!
On 23 August 2012 21:19, Nate VanMaren <VanMarenNP at ldschurch.org<mailto:VanMarenNP at ldschurch.org>> wrote:
Local route group?

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Scott Voll
Sent: Thursday, August 23, 2012 2:10 PM
To: abbas Wali
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] sending 999 calls via the FXO in both CUCM and SRST mode

if you want an easier solution, use a sip e911 provider and let them route it.

otherwise yes, create a site_911 partition and add it to the site CSS with a 911 RP in that site_911 partion.

Scott
On Thu, Aug 23, 2012 at 12:47 PM, abbas Wali <abbaseo at gmail.com<mailto:abbaseo at gmail.com>> wrote:


Hi all,



I have to configure an FXO line for 999 calls.



okay this works fine when i am in SRST mode and I have application global alternate default ON with



dial-peer voice 999 pots

description EMERGENCY

destination-pattern 999

port 0/1/0

forward-digits all



and for incoming calls



voice-port 0/1/0

echo-cancel coverage 64

cptone GB

timing hookflash-out 50

connection plar opx 61234

impedance complex2



where 61234 is an extension.



the only issue is when the CUCM comes back in that FXO re-registeres with CUCM as



dial-peer voice 999010 pots

preference 1

service MGCPAPP

port 0/1/0



again incoming calls wil work fine as I have an Attendent DN configured. but for the outgoing calls I only want it to use the local FXO

(for the emergency services to trunup at the right location)



I wonder if that can only be done in the CUCM as configuring local 999 route pattern and limiting the phones to use them in any case!!

we have alot of site and that will be alot of work on the CUCM.



isnt there a better way!!!!





thanks for the help



A

--
@bbas..


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip




--
@bbas..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120823/b09b014b/attachment.html>