[cisco-voip] Unity Connection Cluster Ports

george.hendrix at l-3com.com george.hendrix at l-3com.com
Thu Aug 30 17:46:29 EDT 2012


Guys, anyone got an idea of what to check?  Still waiting on TAC to respond.  Per TAC, I rebooted the entire cluster, and this resolved the license errors I was getting on the Subscriber.  I deleted the new ports for the subscriber completely in CUC and also in CUCM, then added them back.  I still get the same thing.  The only thing I haven't tried is to start from scratch and remove the 2nd port group as well.  The last email I got from them was asking about tossing the case over to the CUCM team.


From: Hendrix, George (Bill) @ NSS - STRATIS
Sent: Tuesday, August 28, 2012 9:39 AM
To: 'Joel Perez'
Cc: Ted Nugent; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Unity Connection Cluster Ports

Hi Joel, thanks for the list of services.

What's odd.  I have 2 voicemail device pools, one for each hub site.  The device pool in CUCM for the CUC Publisher doesn't match the order the CUCM servers are setup in CUC, but they are registered (I am going to change that so they do match).  The device pool for the CUC Subscriber do match the CUCM server list configured in CUC port group configuration, yet they're not registering.


From: Joel Perez [mailto:tman701 at gmail.com]
Sent: Tuesday, August 28, 2012 9:02 AM
To: Hendrix, George (Bill) @ NSS - STRATIS
Cc: Ted Nugent; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Unity Connection Cluster Ports

Hi George,

I have always setup my CUC clusters on their own device pool with the corresponding sub as the primary in each DP. I know you said you checked it so im just throwing it out there.

These are the services I have running on my cluster, i omitted the ones that are not active:

Pub

Connection DB
Connection Server Role Manager
Connection Serviceability

Critical Services
Connection Conversation Manager
Connection Exchange Notification Web Service
Connection Mailbox Sync
Connection Message Transfer Agent
Connection Mixer
Connection Notifier

Base Services
Connection Administration
Connection DB Event Publisher
Connection License Server
Connection SNMP Agent

Optional Services
Connection Access Layer
Connection CM Database Event Listener
Connection Diagnostic Portal Service
Connection Directory Feeder
Connection File Syncer
Connection Groupware Caching Service
Connection IMAP Server
Connection Inbox RSS Feed
Connection Integrated Mailbox Configuration
Connection Jetty
Connection Message Event Service
Connection Personal Communication Assistant
Connection Realtime Monitoring APIs
Connection Reports Data Harvester
Connection REST Service
Connection SMTP Server
Connection SpeechView Processor
Connection System Agent
Connection Voice Mail Web Service
Connection Voice Recognition Transport
Connection Voice Recognizer


Sub

Connection DB
Connection Server Role Manager
Connection Serviceability

Critical Services
Connection Conversation Manager
Connection Mixer

Base Services
Connection Administration
Connection DB Event Publisher
Connection License Server
Connection SNMP Agent

Optional Services
Connection Access Layer
Connection CM Database Event Listener
Connection Diagnostic Portal Service
Connection File Syncer
Connection Inbox RSS Feed
Connection Integrated Mailbox Configuration
Connection Jetty
Connection Message Event Service
Connection Personal Communication Assistant
Connection Realtime Monitoring APIs
Connection Reports Data Harvester
Connection REST Service
Connection SMTP Server
Connection System Agent
Connection Voice Mail Web Service
Connection Voice Recognition Transport
Connection Voice Recognizer

Joel P


On Tue, Aug 28, 2012 at 7:06 AM, <george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>> wrote:
Yeah, it's non-secure.  The device pool in CUCM has the CUCM Subs first.  The ports in CUC are assigned to the CUC Subscriber server.  There are no licensing issues.  The CUC subscriber shows 150 ports licensed with 48 used.  The ports show in the cluster status as 48 with 0 in service.  What's odd, the "STOP TAKING CALLS" button is available.  I would think it wouldn't be since the ports aren't in service.  I also noticed there are 3 critical services on the Subscriber that aren't running, Connection Mailbox Sync, Connection MTA and Connection NotifierSpeech view is running on the Pub, but not the Sub.  Does this all sound correct? .  I've been trying to find what services SHOULD be running in an HA cluster on each server.


From: Ted Nugent [mailto:tednugent73 at gmail.com<mailto:tednugent73 at gmail.com>]
Sent: Monday, August 27, 2012 10:49 PM

To: Hendrix, George (Bill) @ NSS - STRATIS
Cc: Joel Perez; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

Subject: Re: [cisco-voip] Unity Connection Cluster Ports

I'm assuming you're running non-secure ports? Otherwise it's probably a cert issues. You have your device pool assigned to your second port group configured with a device pool that lists the sub first? (long shot but worth looking at)
Also, and I know we covered this allready, but on you for Phone System-2 PORTS, you are pointing to the HA server and you have the port license loaded, the HA license loaded and all your services are up and running? Very weird issue if all that checks out, it sounds like everything is configured correctly.
On Mon, Aug 27, 2012 at 10:34 PM, <george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>> wrote:
Both port groups are setup similar, except for 1 vs 2.

Port Group names and device prefixes:
Phone System-1
CiscoUM1-VI
Phone System-2
CiscoUM2-VI

Phone System-1 PORTS:
Port Name: Phone System-1-001
SCCP Device Name: CiscoUM1-VI1

Phone System-2 PORTS:
Port Name: Phone System-2-001
SCCP Device Name: CiscoUM2-VI1

Phone System-1 ports are configured to use the CUC Publisher and Phone System-2 ports are configured to use the CUC Subscriber.


-Bill

From: Joel Perez [mailto:tman701 at gmail.com<mailto:tman701 at gmail.com>]
Sent: Monday, August 27, 2012 6:02 PM

To: Hendrix, George (Bill) @ NSS - STRATIS
Cc: Ted Nugent; cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

Subject: Re: [cisco-voip] Unity Connection Cluster Ports

Does the second CUC server have enough licenses, etc...
In CUC you have the "port group name" and you also have the ports with names themselves that should match the port group name.
Those have to match what you have in CUCM. Can you post how your ports are named on both sides?

Also did you make sure that under the port groups you have the correct CUCM IP/Port info?

Its actually pretty simple to set it up, most of my issues with ports not registering have always come from user error and typing in the wrong info somewhere.

Joel P


On Mon, Aug 27, 2012 at 5:03 PM, <george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>> wrote:
Yeah, I have double and triple checked the names on both sides, deleted and also re-added the ports.  Still the same.  They don't register.  When I go into CUC and "test" the ports, they show up as "rejected" in CUCM.


From: Ted Nugent [mailto:tednugent73 at gmail.com<mailto:tednugent73 at gmail.com>]
Sent: Monday, August 27, 2012 4:56 PM

To: Hendrix, George (Bill) @ NSS - STRATIS
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Unity Connection Cluster Ports

Yes you will create a new integration in CUCM, they usually get rejected because the port names don't match
ex. CiscoUM2-VI1, compare what they are called in CUCM and CUC and make sure they match up.
On Mon, Aug 27, 2012 at 3:26 PM, <george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>> wrote:
Hi Ted,

  So do you add the voicemail ports in CUCM as a "NEW" voicemail server for the subscriber, or current voicemail server?  TAC had me to add them as a NEW voicemail server, but when I attempt to test the ports in Unity Connection, they don't register and I see  them "Rejected" in CUCM.

Thanks,
Bill

From: Ted Nugent [mailto:tednugent73 at gmail.com<mailto:tednugent73 at gmail.com>]
Sent: Wednesday, August 22, 2012 8:45 PM
To: Hendrix, George (Bill) @ NSS - STRATIS
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Unity Connection Cluster Ports

In an HA cluster the servers are active-active so ports should be registered for both servers, you can actually create 2 sets of Unity HP/HL/LG and dial into each server seperately to test this, this was not possible in Unity FO. Regarding licensing, you only need the HA license and ports installed on the second server, all applications and features are shared in the cluster. Hope that helps.
On Wed, Aug 22, 2012 at 4:16 PM, <george.hendrix at l-3com.com<mailto:george.hendrix at l-3com.com>> wrote:
Hey Guys,

  I have a few questions regarding UC Clusters.  First, do you have to add an application entry in CUCM for both the unity connection publisher AND subscriber?  When one server is the "active" server, should the ports on the secondary server also be registered?  And last, should there be license files installed for all features on BOTH servers, or are the features for both servers covered by the license files installed on the Publisher and just the port license is required on the subscriber server?  I ask about the license because of the output below.

Publisher:
Users with voice mailboxes

LicSubscribersMax

1335

967

368

1335

Users with IMAP or Single Inbox access to voice messages

LicIMAPSubscribersMax

20100

967

19133

20100

Cisco Unity Inbox users

LicVMISubscribersMax

20100

78

20022

20100

TTS and ASR (advanced) users

LicAdvancedUserMax

20100

967

19133

20100

Voice ports

LicVoicePortsMax

396

48

348

-

Text-to-speech sessions

LicRealspeakSessionsMax

550

0

550

-

Voice-recognition sessions

LicUnityVoiceRecSessionsMax

550

0

550

-

SpeechView users

LicSTTSubscribersMax

0

0

0

0



Subscriber:
Users with voice mailboxes

LicSubscribersMax

0

897

438

1335

Users with IMAP or Single Inbox access to voice messages

LicIMAPSubscribersMax

0

897

19203

20100

Cisco Unity Inbox users

LicVMISubscribersMax

0

63

20037

20100

TTS and ASR (advanced) users

LicAdvancedUserMax

0

897

19203

20100

Voice ports

LicVoicePortsMax

150

0

150

-

Text-to-speech sessions

LicRealspeakSessionsMax

150

0

150

-

Voice-recognition sessions

LicUnityVoiceRecSessionsMax

150

0

150

-

SpeechView users

LicSTTSubscribersMax

0

0

0

0


And also based on the page "Managing License in Cisco Unity Connection 8.X<http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag310.pdf>".

"When a Cisco Unity Connection cluster (high availability) is configured, two licenses are required

because licenses are not replicated. The license that has the MAC address or license MAC of the

publisher server must be installed on the publisher server. The license that has the MAC address or

license MAC of the subscriber server must be installed on the subscriber server."



Thanks,

Bill Hendrix


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120830/c59711c3/attachment.html>


More information about the cisco-voip mailing list