[cisco-voip] Call routing question -- probably a simple one..

[Ryan Ratliff]

If you have a standard voip dial-peer for other incoming calls (ie with incoming called-number . configured) from CUCM to that gateway it'll likely work, as long as you have allowed h323 to h323 connections (under voice service voip IIRC).

-Ryan

On Nov 29, 2012, at 5:00 PM, Tim Reimers <treimers at ashevillenc.gov> wrote:

Hi all –
 
I’m having a problem doing something that should be simple –
 
I have a particular incoming DID that arrives on one of our PRIs on
an H.323 based C2821 router.
I have that particular DID XXXX sent via a voip dial-peer over to a fax server.
 
What I want to do is be able to call that same XXXX DID from a phone on the UCM system.
 
Knowing that all of of my existing route patterns in UCM which were targeted at the voice gateways
all had 9. route patterns, I knew that UCM would not route my XXXX DID to that gateway by default,
so I put in a route pattern in the UCM that essentially says “send DID XXXX to the C2821 where that dial-peer VOIP exists”
 
DNA now shows that the call routes, to the voice gateway.
 
I guess I need an additional dial-peer of some sort (pots??) on the router – for the incoming call leg
from the UCM to match the 4-digits I’m trying to then send onwards to the fax server…
 
I don’t think about this stuff often enough to keep all the logic in my head…..
 
What silly stupid one-simple step am I not thinking of???
 
Tim Reimers
Systems Analyst II
Information Technology Services
City of Asheville
70 Court Plaza
Asheville, NC 28801
Direct phone - 828-259-5512
IT Services main front desk - 828-259-5510
treimers at ashevillenc.gov
 
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121203/141d4710/attachment.html>