[cisco-voip] FXS over VPN

[Paul]

Create a voip dial-peer with a session target pointing to the remote 2801 on the central CCME box and then have a pots dial-peer on the 2801 addressed with desired DID. I'm assuming you already have a dial-peer to catch all inbound calls on the PRI. 'debug voice dialpeer inout' for verification/troubleshooting.





________________________________
From: Angel Moon <amoon at DataSourcePro.com>
To: cisco-voip at puck.nether.net 
Sent: Friday, December 7, 2012 6:20 AM
Subject: [cisco-voip] FXS over VPN


Hello All,


I have a scenario with a Central CME and a remote site connected via VPN with a 2801 at the remote site.  PRI at central site.  I would like to get a DID routed over the VPN to an FXS port on the remote router.  Remote router is not running telephony-services, just routing.  Is this possible and if so can someone give me a high level overview?   Thanks in advance!
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip