[cisco-voip] Avaya phones 9620/30/40 with CUCM

[Heim, Dennis]

I suspect the cost of increased dlu requirement's for 3rd party endpoints will still make John Chambers happy.

Dennis Heim | Sr. UC Engineer
World Wide Technology | 314.212.1814 | dennis.heim at wwt.com
"Creating Impact, Ignition & Scalability"

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peter Slow
Sent: Tuesday, December 18, 2012 2:42 PM
To: José Paulo de Oliveira Petry
Cc: Cisco VoIPoE List
Subject: Re: [cisco-voip] Avaya phones 9620/30/40 with CUCM

trying this will cause your callmanager to immediately burst into flames. succeeding will cause Mr. chambers to spontaneously conflagrate as well.


On Tue, Dec 18, 2012 at 2:08 PM, José Paulo de Oliveira Petry <petrybr at gmail.com> wrote:
> Hello,
>
> Does anyone here knows if i can use Avaya phones (9620, 9630 and 9640) 
> with CUCM as a SIP 3rd party end point??
>
> Regards,
>
> José Paulo de Oliveira Petry
> petrybr at gmail.com
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip