[cisco-voip] SRSV on CUXN 9.1.1

Fri Dec 21 10:50:50 EST 2012

The best part is pretty much all of the licenses issued form 9.0 where actually CUWL premium regardless of what was requested.  Because that was the level that worked out for the 9.0 licenses changes that happened before FCS.

9.1 actually has the licenses that 9.0 went to market with, but didn't have the back end to support.

But you'd only really know about this if you had a 9.0 system, and most people don't.

-Nate
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, December 21, 2012 8:44 AM
To: Matthew Loraditch
Cc: Cisco Vo IP Group
Subject: Re: [cisco-voip] SRSV on CUXN 9.1.1

Correct, and it's not that 9.0 UCM won't work with 9.1 ELM it's just that if UCM is requesting a license type that 9.1 ELM doesn't know about then ELM will throw an error.
Here's how it breaks down:
*ELM 9.1 will not support UCM 9.0 w/ Advanced or CUWL Prem
*ELM 9.0 will not support UCM 9.1 w/ Enhanced Plus

As long as we don't do any further licensing type changes between releases then this should be fine going forward.

-Ryan

On Dec 21, 2012, at 10:26 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>> wrote:

I think (hope) this is more to do with the combination of licensing changes that have been made with 9.1 than anything else.

Matthew G. Loraditch - CCNP-Voice, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:voip-bounces at puck.nether.net>] On Behalf Of Lelio Fulgenzi
Sent: Friday, December 21, 2012 10:14 AM
To: Ryan Ratliff
Cc: Cisco Vo IP Group
Subject: Re: [cisco-voip] SRSV on CUXN 9.1.1

After reading the release notes, it seems you need to upgrade CUCM 9.0 to 9.1 before you can use ELM 9.1.  I haven't checked out the compatibility matrix for ELM yet, but I'm sure hoping they build in an N-1 compatibility with ELM. If it's to be a true "enterprise" wide licensing solution, it's going to have to support different versions, I would argue it should be compatible with all previous versions (to a point) and not be as tightly controlled as the CUCM/UCCx compatibility.

I understand that it can be installed co-resident with the apps, but my goal is to install a standalone ELM server which will service my two CUCM clusters, three Unity Connection servers and in the future a UCCx HA pair.

Let's hope this is just a first crack issue and in the future it will resolve this.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Ryan Ratliff" <rratliff at cisco.com<mailto:rratliff at cisco.com>>
To: "Nick" <csvoip at googlemail.com<mailto:csvoip at googlemail.com>>
Cc: "Cisco Vo IP Group" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Friday, December 21, 2012 9:32:20 AM
Subject: Re: [cisco-voip] SRSV on CUXN 9.1.1

Depending on your version the co-residency support policy will probably allow you to run it.  I'm fairly certain since we are providing it you can count it as a UC app though.

I haven't found a way to navigate to the Informacast docs yet but if you search cisco.com<http://cisco.com/> for informacast you'll find the docs for it.

>From what I've seen CCX 9.0(2) will support UCM 9.1.  I don't believe 9.0(1) will be certified but things may change.

-Ryan

On Dec 21, 2012, at 5:20 AM, Nick <csvoip at googlemail.com<mailto:csvoip at googlemail.com>> wrote:

I presume you still need to install this on a separate server, can this be deployed on a UCS C series co-located with other UC apps?
On 21 December 2012 01:07, Paul <asobihoudai at yahoo.com<mailto:asobihoudai at yahoo.com>> wrote:
CCM 9.1.1 now with ****PAGING**** included!
THANKS CISCO!!!

...now if you guys would be so kind as to certify ccm9.1.1 as compatible with ccx 9.0.1 everything will be much happier (for me at least)

________________________________
From: Ryan Ratliff <rratliff at cisco.com<mailto:rratliff at cisco.com>>
To: Ahmed Elnagar <ahmed_elnagar at hotmail.com<mailto:ahmed_elnagar at hotmail.com>>
Cc: 'Cisco Vo IP Group' <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Thursday, December 20, 2012 1:18 PM

Subject: Re: [cisco-voip] SRSV on CUXN 9.1.1

I'm glad you all are itching to play with the new stuff over the holidays :)

Regarding 9.0 we have never posted a .0 release to cisco.com<http://cisco.com/> for download because of the fact that you need a new license to run the new major version and the only way to get the license is to order the upgrade.  By putting the upgrade out there we'd get a bunch of people who upgrade and then complain that they don't have the license.   With 9.1 the file will get posted because customers already on 9.0 can upgrade without having to get a new license.

-Ryan

On Dec 20, 2012, at 4:01 PM, Ahmed Elnagar <ahmed_elnagar at hotmail.com<mailto:ahmed_elnagar at hotmail.com>> wrote:

Seems we catched the guy while he is uploading the ISO files :)

Regards,
Ahmed Elnagar | Unified Communication Team Leader | CCIE #24697, Voice

-----Original Message-----
From: Matthew Loraditch [mailto:MLoraditch@<mailto:MLoraditch@>heliontechnologies.com<http://heliontechnologies.com/>]
Sent: Thursday, December 20, 2012 10:56 PM
To: Justin Steinberg; Ahmed Elnagar
Cc: Cisco Vo IP Group
Subject: RE: [cisco-voip] SRSV on CUXN 9.1.1

It's there and I can download but it's not all there yet... the download is
finishing before completing, I'm sure stuff is still propagating

Matthew G. Loraditch - CCNP-Voice, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830<tel:410.252.8830>
fax.  410.252.9284<tel:410.252.9284>

Twitter<http://twitter.com/heliontech>  |
Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  |
Website<http://www.heliontechnologies.com/>  |  Email
Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20
Request>

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>
[mailto:cisco-<mailto:cisco->voip-bounces at puck.nether.net<mailto:voip-bounces at puck.nether.net>] On Behalf Of Justin Steinberg
Sent: Thursday, December 20, 2012 3:48 PM
To: Ahmed Elnagar
Cc: Cisco Vo IP Group
Subject: Re: [cisco-voip] SRSV on CUXN 9.1.1

it's posted now but when I try to download, it says I am not entitled.   My
account is associated with a contract that has ordered 9.0.
On Thu, Dec 20, 2012 at 2:55 PM, Ahmed Elnagar
<ahmed_elnagar at hotmail.com<mailto:ahmed_elnagar at hotmail.com><mailto:ahmed_elnagar at hotmail.com>> wrote:
Hi Ryan;

Do you have an expected date for the release?

Regards,
Ahmed Elnagar | Unified Communication Team Leader | CCIE #24697, Voice
[Description: Description: Description: MS Green]

From:
cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net><mailto:cisco-voip-bounces at puck.nether.net

[mailto:cisco-<mailto:cisco->voip-bounces at puck.nether.net<mailto:voip-bounces at puck.nether.net><mailto:cisco-voip-bounces at puck.ne
ther.net<http://ther.net/>>] On Behalf Of Ryan Ratliff
Sent: Thursday, December 20, 2012 7:43 PM
To: Paul
Cc: Cisco Vo IP Group
Subject: Re: [cisco-voip] SRSV on CUXN 9.1.1

It's in the process of being posted so documents will be appearing as they
are loaded.

-Ryan

On Dec 20, 2012, at 12:09 PM, Paul
<asobihoudai at yahoo.com<mailto:asobihoudai at yahoo.com><mailto:asobihoudai at yahoo.com>> wrote:

CCM/CUXN 9.1.1 out today...can't read any of the CCM release notes/what's
new or changed yet but at least for CUXN it's available.

Thanks for implementing SRSV in CUXN 9.1.1 Cisco! That was quick!

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net><mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net><mailto:cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121221/e95d1353/attachment.html>