[cisco-voip] FXS-DID MGCP?

[Steve Miller]

Caller ID on FXS is supported because the port is controlled by CUCM. FXS ports 
are normally used by station devices like FAX machines. Caller id on FXO ports 
has not been supported in the past unless running h323. Also T1 CAS does not 
support caller id under MGCP.

Steve



________________________________
From: Erick B. <erickbee at gmail.com>
To: Leslie Meade <Leslie.Meade at lvs1.com>
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: Thu, December 27, 2012 1:29:27 PM
Subject: Re: [cisco-voip] FXS-DID MGCP?


Last I checked Caller ID on the FXS-DID card in DID mode was not supported. 



On Thu, Dec 27, 2012 at 1:20 PM, Leslie Meade <Leslie.Meade at lvs1.com> wrote:

It works bu I am pretty sure you will lose caller ID
>
>
>
>
>Sent from my iPad
>
>
>On Dec 27, 2012, at 11:16 AM, "Scott Voll" <svoll.voip at gmail.com> wrote:
>
>> We currently have fxs-did working on our h323 GW.  There is some talk about 
>>moving it to MGCP.
>>
>> It doesn't look like it's supported.  Can anyone counter that?
>>
>> TIA
>> Scott
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121227/d525b363/attachment.html>