[cisco-voip] upgrade during install from 9.0 to 9.1

[Nate VanMaren]

I had lots of problems doing upgrade during installs with 9.0 ESs.  The ESs are usually bootable so I just gave up and installed fresh.  Is the 9.1 download bootable?



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Frazee
Sent: Monday, December 31, 2012 3:50 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] upgrade during install from 9.0 to 9.1

This was for UCM and Unity Connection. didnt try anything else.


On Mon, Dec 31, 2012 at 1:04 PM, Tim Frazee <tfrazee at gmail.com<mailto:tfrazee at gmail.com>> wrote:
I have the 9.0 NFR and the 9.1 upgrade iso pulled from CCO.

I'm getting an error if I feed the 9.1 iso to the 9.0 install process that i want to upgrade during the install process. I've been able to do this many times in the past with never a problem like this.

Anyone have any ideas?


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20121231/866a5e67/attachment.html>