[cisco-voip] E1 Dialing Issue

[Jobe Gates]

It's affecting outbound routing.  I can call in fine.

On Tue, Feb 14, 2012 at 12:05 PM, Abdul Salam . <salamka at gmail.com> wrote:

> Hi Jobe,
>
>
> I think a reload would fix that , the message may not affect call routing.
>
>
> *---AS*
>
>
>
>
> On Tue, Feb 14, 2012 at 9:27 PM, Jobe Gates <jobe at gatesweb.net> wrote:
>
>> I'm having a weird problem and wanted to see if anyone else ran across
>> this.  For some reason I'm getting the second TEI_Assigned.
>>
>>
>> #sh isdn status
>> Global ISDN Switchtype = primary-net5
>> ISDN Serial0/0/0:15 interface
>>         dsl 0, interface ISDN Switchtype = primary-net5
>>     Layer 1 Status:
>>         ACTIVE
>>     Layer 2 Status:
>>         TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
>>         TEI = 255, Ces = 255, SAPI = 0, State = TEI_ASSIGNED
>>     Layer 3 Status:
>>         0 Active Layer 3 Call(s)
>>     Active dsl 0 CCBs = 0
>>     The Free Channel Mask:  0xFFFF7FFF
>>     Number of L2 Discards = 0, L2 Session ID = 20
>>     Total Allocated ISDN CCBs = 0
>>
>> Thanks,
>> Jobe
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120214/cc69ab1b/attachment.html>