[cisco-voip] Cheap CME platform?

[Paul Wozney]

You're looking for the CME compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm

---
Paul Wozney
Network Consultant
phone: +1 604-629-9975
toll free: +1 866-748-0516
email: paul at wozney.ca
web: http://wozney.ca



On Wed, Feb 15, 2012 at 10:16, chris <tknchris at gmail.com> wrote:

> My issue is not getting firmware, its identifying whats compatible with
> the version of cme I indicated.I'm looking all over cisco's site cant seem
> to find anything that explains it. Can I just use the latest? Or will that
> not work with such an old version?
>
>
> On Wed, Feb 15, 2012 at 12:37 PM, Dennis Heim <Dennis.Heim at cdw.com> wrote:
>
>>  In order to get firmware you will need a Cisco support contract. Then
>> you should be able to download all the firmware to your hearts content.**
>> **
>>
>> ** **
>>
>> Dennis Heim
>> Senior Engineer (Unified Communications)
>> CDW  Advanced Technology Services
>> 10610 9th Place
>> Bellevue, WA 98004
>>
>> 425.310.5299 Single Number Reach (WA)****
>>
>> 317.569.4255 Single Number Reach (IN)
>> 317.569.4201 Fax
>> dennis.heim at cdw.com*
>> *cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>
>> ****
>>
>> ** **
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *chris
>> *Sent:* Wednesday, February 15, 2012 12:23 PM
>> *To:* Gregory Wenzel
>>
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] Cheap CME platform?****
>>
>> ** **
>>
>> Thanks everyone I got CME 4.1 working on the 2621XM with 128mb ram. Only
>> thing now is I'm trying to figure out how to identify which loads I need to
>> use for my phones. I'm not sure if I will need a older load since the call
>> manager is so old? I have a few 7960's that I converted to SIP a long time
>> ago. I think I am familiar enough to figure out how to convert the phones
>> just not sure which firmware I need.****
>>
>> ** **
>>
>> What's the latest load/fw for 7960 I can use with CME 4.1?****
>>
>> ** **
>>
>> thanks****
>>
>> chris****
>>
>> On Wed, Feb 15, 2012 at 6:37 AM, Gregory Wenzel <gwenzit at gmail.com>
>> wrote:****
>>
>> Your on the right track with the xm platform. Do you have cme code. If
>> you can get it the file name is called c2600-adventerprisek9-mz.124-25a is
>> the last ios made for the 2600 series is overkill but will do all.****
>>
>>  ****
>>
>> Also for the cme file you want is called cme-124-15XZ2.zip is cme 4.3 and
>> if you want to do any TCL scripting that file is called
>> cme-bacd-2.1.2.2.tar.****
>>
>>  ****
>>
>> You will have to spend some coin either way everyone says gns3 will work
>> which it does. Personally i like a hardware lab. Ebay will be your friend,
>> keep in mind sellers with low ratings are usually untrust worthy.****
>>
>>  ****
>>
>>  ****
>>
>>  ****
>>
>> On Tue, Feb 14, 2012 at 5:57 PM, chris <tknchris at gmail.com> wrote:****
>>
>>   Hi,****
>>
>> ** **
>>
>> Can anyone recommend a cheap platform for cme? I am new to cisco voice
>> and want to learn it. even if its starting out with cme 4.x or something
>> old. i have a 2620xm but i dont have enough flash or ram and it looks to be
>> almost $300 to upgrade it. also have a 1841 but it doesnt appear to be able
>> to run cme. Im hoping i can find something cheaper to run cme on. I also
>> stumbled across the fact that you can boot IOS via TFTP so I was thinking
>> maybe I could squeeze things into a smaller flash by putting some bits on
>> TFTP.****
>>
>> ** **
>>
>> Thanks for any advice you have****
>>
>> chris ****
>>
>> ** **
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip****
>>
>>
>>
>>
>> -- ****
>>
>> Greg Wenzel, CCVP****
>>
>>  ****
>>
>> ** **
>>
>> ** **
>>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120215/b4b61528/attachment.html>