[cisco-voip] +E.164 digit dial plan with non-DID numbers

bill at hitechconnection.net bill at hitechconnection.net
Mon Feb 20 15:59:25 EST 2012


I am trying to get a handle on E.164 dialing and + based dialing.  I
understand the different design models such as Uniform ON-Net Dialing and
Variable-Length On-Net Dialing with Flat Addressing. My trouble comes into
understanding how I can globalize every number in the system to +E.164 /
E.164 numbering plan. I am concerned with smaller sites in a larger
deployment that have non-DID numbers.



So let’s say I have a site1 with 40 IP phones. Site1 has 6 POTS lines setup
in a hunt group with the main number being 3195554000. Each IP phone is
given an extension in the 1XXX range, example 1001, 1002, 1003 and so on.
How should I globalize this out to other internal clients and to the PSTN?



Now lets take site2. This site has 90 IP phones and a block of numbers from
the PSTN of 31955561XX. Site2 has several internal only DNs such as bells,
paging numbers, intercom numbers and lobby phones that the customer does
not want to use DID numbers on. How would I accomplish this and still
globalize the numbers correct?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120220/527af29b/attachment.html>


More information about the cisco-voip mailing list