[cisco-voip] CUCM 8.5 AD integration question or two
Gr
grccie at gmail.com
Thu Feb 23 08:26:00 EST 2012
Thanks Lelio - made life easier. Good on you buddy!
Sent from my iPhone
On 24/02/2012, at 12:10 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
> As far as I know, you do not need special licenses. However, there are license requirements on the AD side for authentication, etc. Make sure to speak to your AD team to ensure you are in compliance.
>
> Correct in saying the CUCM configuration is simple, the hardest thing I found was doing things with SSL. You need to download the certificate from your root certificate server and install on your publisher. If you're using plaintext synch/auth, you're good to go.
>
> I think the initial load took significantly longer than subsequent syncs. We had about 40,000 users and it took around an hour I think. Once you press perform full sync button, it will change to cancel until it's completed. You can refresh the page, or go back to the list of servers and select one and check to see that it's changed back. You can also get a pseudo-status by going to the end users list and seeing how many are imported.
>
> Somethings to consider:
> all current local end users will be deleted, make sure you don't need them
> AD users will need a last name. users without a last name will not be imported
> take note of what is updated with syncs and what is not, you'll be surprised
> that's about it.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
> - LFJ (with apologies to Mr. Popeil)
>
>
> From: "gr11" <grccie at gmail.com>
> To: cisco-voip at puck.nether.net
> Sent: Thursday, February 23, 2012 7:55:25 AM
> Subject: [cisco-voip] CUCM 8.5 AD integration question or two
>
> Hi List,
>
> Just a quick one regards to AD integration with CUCM 8.5, i believe it should be fairly simple?
>
> 1) I am sure we do not need any special license to do that, but just wanted to confirm as i am pushed into some urgent integration at the last moment.
> 2) CUCM conifguration is fairly simple, do we need to do configure anything in AD, assuming users are already there???
> 3) How long normally will take to sync around 4000 users?
> 4) Anything to be careful of?
>
> Sorry last email just got sent by mistake, before i could finish.
>
> Thanks,
> GR
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120224/c79f0426/attachment.html>
More information about the cisco-voip
mailing list