[cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems

[Roger Wiklund]

Yeah let's hope so.

Regarding LDAP there is a "Enable LDAP user Authentication" that you
can set to enable, have you tried that?

/Roger

On Tue, Feb 28, 2012 at 12:58 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> I would have to agree with what I've seen so far. I can't consistently get things to work properly. Including TFTP downloads. We'll have to see how it goes with the next few versions. It is fairly new after all.
>
> Sent from my iPhone...
>
> "There's no place like 127.0.0.1"
>
> On Feb 27, 2012, at 6:32 PM, Roger Wiklund <roger.wiklund at gmail.com> wrote:
>
>> Thanks,
>>
>> I deleted the application and re-installed it and then it worked (sigh).
>> Before that I even tried to delete the account, empty cache etc, no go.
>>
>> I think overall this client is not very stable, I find myself having
>> to manually shut it down and restart for it to even register.
>>
>> Thanks,
>>
>> /Roger
>>
>> On Mon, Feb 27, 2012 at 10:53 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>>> i had it working without issue. not sure what could be wrong.
>>>
>>> however, that being said, i'm finding quite a bit of issues getting other
>>> things working.
>>>
>>> for one, i was surprised that SIP Digest Authentication uses the local CUCM
>>> password not the LDAP authentication password. UGH!!!! and there is no way
>>> for a user to modify this via CCMUser pages! double-UGH!!!!
>>>
>>> desktop integration is failing with CTI timeouts. got a TAC case open to try
>>> to figure that out. it worked for a few minutes today with one successful
>>> login, but no more.
>>>
>>> still haven't tried the connection integration. I'm hoping I can get it
>>> working with our 7.1(2) ES code.
>>>
>>>
>>>
>>>
>>> ---
>>> Lelio Fulgenzi, B.A.
>>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>>> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>> Cooking with unix is easy. You just sed it and forget it.
>>>                               - LFJ (with apologies to Mr. Popeil)
>>>
>>>
>>> ________________________________
>>> From: "Roger Wiklund" <roger.wiklund at gmail.com>
>>> To: "Cisco VOIP" <cisco-voip at puck.nether.net>
>>> Sent: Monday, February 27, 2012 12:53:32 PM
>>> Subject: [cisco-voip] Cisco Jabber for iPhone transfer to mobile
>>> network        problems
>>>
>>>
>>> Has anyone successfully configured so you can transfer a jabber voip
>>> call to the GSM network?
>>>
>>> I have a registered Jabber for iPhone, I can receive in/out calls both
>>> internally and externally.
>>> I have configured Mobile Identity with my mobile phone number, so if
>>> the phone is not registered or no answer the mobile phone rings.
>>> I have configured partial match with 9 digits in service parameter. I
>>> have checked that caller ID is matching Mobile Identify.
>>> I have configured the hand off number
>>> Device CSS/Rerouting CSS etc is all correct.
>>> I have followed the steps in the config guide for Jabber.
>>>
>>> But still when I press the button to transfer the call to mobile
>>> network it tried for about 5 seconds then nothing. I can see no
>>> activity in/out on the gateways.
>>>
>>> Any tips?
>>>
>>> /Roger
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip