[cisco-voip] Cisco Jabber for iPhone transfer to mobile network problems

[Roger Wiklund]

Thanks, Ryan.

That might explain why I cant get send call to mobile network to work
with Jabber for iPhone 8.6.3 because I tried the old Cisco mobile 8.0
and that worked right away.

I'm a bit confused though, 8.6(2.21008-1) is not even out yet? The
latest upgrade I can find is UCSInstall_UCOS_8.6.2.20000-2.sgn.iso?

/Roger

On Tue, Feb 28, 2012 at 4:48 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
> Cisco Unified Communications Manager Requirements
>
> Cisco Unified Communications Manager:
>
> Unified CM 7.1.5
> Unified CM 8.0.3
> Unified CM 8.5.1
> Unified CM 8.6.2, starting with 8.6(2.21008-1)
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/8.6/b_jabber_iphone_release_notes.html#topic_8BAF26DABA8B40939B221E50E8AE63BF
>
> For versions not on this list that support the older Jabber for iPhone YMMV.
>  They are certainly not tested.
>
> -Ryan
>
> On Feb 28, 2012, at 5:22 AM, kpyib at tin.it wrote:
>
> Hi Roger,
>    I've also installed Cisco Jabber for ipHone version 8.6.3, but can't make
> it work with CUCM 8.6.1a.
>
>
> Do you can confirm that Jabber for iPhone work only with CUCM 8.6.2a?
>
> Cisco Jabber for Android 8.6.4.1434 works fine also with CUCM 8.6.1a.
>
>
>
> Thank you
>
> Can you confirm that?
>
>
>
> Regards
>
> Alessandro Bertacco
>
> ----Messaggio originale----
> Da: roger.wiklund at gmail.com
> Data: 27-feb-2012 18.53
> A: "Cisco VOIP"<cisco-voip at puck.nether.net>
> Ogg: [cisco-voip] Cisco Jabber for iPhone transfer to mobile network
> problems
>
> Has anyone successfully configured so you can transfer a jabber voip
> call to the GSM network?
>
> I have a registered Jabber for iPhone, I can receive in/out calls both
> internally and externally.
> I have configured Mobile Identity with my mobile phone number, so if
> the phone is not registered or no answer the mobile phone rings.
> I have configured partial match with 9 digits in service parameter. I
> have checked that caller ID is matching Mobile Identify.
> I have configured the hand off number
> Device CSS/Rerouting CSS etc is all correct.
> I have followed the steps in the config guide for Jabber.
>
> But still when I press the button to transfer the call to mobile
> network it tried for about 5 seconds then nothing. I can see no
> activity in/out on the gateways.
>
> Any tips?
>
> /Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>