[cisco-voip] Unity COnnection MWI flag

[Lelio Fulgenzi]

ah. sorry. not sure about that. i took a quick look and didn't see anything. 

i know that Jeff L. reads the netpro forums, so you can post there... 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Leslie Meade" <lmeade at salientnetworks.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip" <cisco-voip at puck.nether.net> 
Sent: Tuesday, February 28, 2012 1:05:19 PM 
Subject: Re: [cisco-voip] Unity COnnection MWI flag 


Yea I have done that.. But my issue is, 
Is it possible to change a system parameter to always send a MWI even though Unity thinks that the MWI is on ? 






From: Lelio Fulgenzi < lelio at uoguelph.ca > 
Date: Tue, 28 Feb 2012 13:04:07 -0500 (EST) 
To: Leslie Meade < lmeade at salientnetworks.com > 
Cc: cisco-voip < cisco-voip at puck.nether.net > 
Subject: Re: [cisco-voip] Unity COnnection MWI flag 


edit > message waiting indicators > reset all 

for the whole server: 

telephony integration > phone system > Synchronize All MWIs on This Phone System (click button) 

be careful with this one, could cause some call processing issues 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120228/ef01a010/attachment.html>