[cisco-voip] Help on connecting Remote CME to CUCM Headquarters Please ?

[Erick Wellnitz]

In the past I've also had to do a 'logg mon' from global config mode to see
debug output

On Wed, Feb 29, 2012 at 7:42 AM, Jobe Gates <jobe at gatesweb.net> wrote:

> Do a term mon.
>
> On Wed, Feb 29, 2012 at 8:35 AM, Adewale2 <adewale2 at yahoo.com> wrote:
>
>>  Hello
>> I ran debug command but nothing shows
>> Cheers
>> Addy
>>
>>
>>     ------------------------------
>> *From:* ccieid1ot <ccieid1ot at gmail.com>
>> *To:* Adewale2 <adewale2 at yahoo.com>
>> *Cc:* Ted Nugent <tednugent73 at gmail.com>; "cisco-voip at puck.nether.net" <
>> cisco-voip at puck.nether.net>
>> *Sent:* Tuesday, February 28, 2012 10:53 PM
>>
>> *Subject:* Re: [cisco-voip] Help on connecting Remote CME to CUCM
>> Headquarters Please ?
>>
>> Do a debug on your HQ gateway to see what digits are passing through from
>> CUCM.
>>
>> debug voice ccapi inout
>> debug voice dial peer all
>>
>> On Tue, Feb 28, 2012 at 3:37 AM, Adewale2 <adewale2 at yahoo.com> wrote:
>>
>>  Hello ,
>>   My phones would be connected through H323 dial peers to CUCM.
>>  I just want a normal WAN -to- WAN connection  from CME to CUCM
>> Regards,
>> Addy
>>     ------------------------------
>> *From:* Ted Nugent <tednugent73 at gmail.com>
>> *To:* Adewale2 <adewale2 at yahoo.com>
>> *Cc:* "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
>> *Sent:* Monday, February 27, 2012 4:07 PM
>>
>> *Subject:* Re: [cisco-voip] Help on connecting Remote CME to CUCM
>> Headquarters Please ?
>>
>>  How are your phones configured (SCCP or SIP), are you using H323 or SIP
>> dialpeers to CM? What do your inbound dialpeers look like coming into CME
>> from CM and what does your CUE dialpeer look like? A copy of your config
>> might also be helpful. This is typically an issue with your inbound
>> dialpeer and/or a conflict between H323/SIP.
>>
>>
>> On Mon, Feb 27, 2012 at 9:41 AM, Adewale2 <adewale2 at yahoo.com> wrote:
>>
>>  Hello ,
>>  I can call from Branch  (BR) CME to Phones at Headquarters with CUCM
>> 8.5, but   Headquarters (HQ) Office can not call branch (BR) office .
>>  I created Dial-peer 1101 on my Branch CME with 9 digit  ( 7045627...  )
>> also dial peer on  Headquarters HQ 1 & HQ2.
>>  Any Help Please?
>> Regards,
>> Addy
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>>
>> --
>> duy
>> CCIE #27737 Voice
>>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120229/eaca610c/attachment.html>