[cisco-voip] 8.x upgrade question

[Lelio Fulgenzi]

Thanks everyone. 

I'm taking that it is offline because of the refresh status due to new linux core? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Nate VanMaren" <VanMarenNP at ldschurch.org> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Gregory Wenzel" <gwenzit at gmail.com> 
Cc: "Cisco VOIP" <cisco-voip at puck.nether.net> 
Sent: Tuesday, January 3, 2012 1:26:39 PM 
Subject: RE: [cisco-voip] 8.x upgrade question 




There is a special file that makes it so you can upgrade to 8.6.X. It adds an STMP server and email address on the upgrade page. It is because the 8.6 upgrade changes the redhat kernel and is an OFFLINE upgrade. 

The h.323 gateway fix I think is for 8.6.1, or the very first release of 8.6.2, either way you shouldn’t need if if you’re using the latest 8.6 on CCO 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Tuesday, January 03, 2012 10:58 AM 
To: Gregory Wenzel 
Cc: Cisco VOIP 
Subject: Re: [cisco-voip] 8.x upgrade question 




which patch? does the documentation point this out as part of the requirements? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----


From: "Gregory Wenzel" < gwenzit at gmail.com > 
To: "Ed Leatherman" < ealeatherman at gmail.com > 
Cc: "Cisco VOIP" < cisco-voip at puck.nether.net > 
Sent: Tuesday, January 3, 2012 12:53:48 PM 
Subject: Re: [cisco-voip] 8.x upgrade question 

I upgraded from 7.1.5-33000 to that version 8.6.2-20000-2 with no problem but you will need to run the patch fix first and maybe the h323 patch fix before you upgrade. The patch fix took 45 min to run, the upgrade took 4 hours since it goes from rhat4 to 5 


On Tue, Jan 3, 2012 at 9:57 AM, Ed Leatherman < ealeatherman at gmail.com > wrote: 

This is probably a dumb question (since when has that stopped me before right?) 





Can I use the UCSInstall_UCOS_8.6.2.20000-2.sgn.iso image from cisco.com to upgrade from 7.1.5, assuming I have an 8.x upgrade kit? In-place upgrade, no new hardware or anything. 





My upgrade kit DVD is 8.6.1, I'd like to just skip up to the latest release instead of upgrading to 8.6.1 and then doing another round of patches/reboots to get there. 





-- 
Ed Leatherman 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 




-- 


Greg Wenzel, CCVP 






_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 




NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120103/c54013f3/attachment.html>