[cisco-voip] Cius Feedback?

Ryan Ratliff rratliff at cisco.com
Wed Jan 4 14:00:56 EST 2012


The way I understand it the requirement is an OR so ESW or SNT will get you phone loads.  More details on that will be coming in February with the warning being up for at least 6 months before access gets locked down again.


-Ryan

On Jan 4, 2012, at 1:45 PM, Scott Voll wrote:

Ryan for clarification, if we have SAU / ESW /etc on CM we WILL be able to download phone firmware?

or do we have to have Smartnet on the phones also?

TIA

Scott

On Wed, Jan 4, 2012 at 10:29 AM, Ryan Ratliff <rratliff at cisco.com> wrote:
By the way access to Cius firmware got sorted out the last week of December.  In the future for all phone downloads Smartnet on the phone hardware or ESW on your CUCM will get you access to the files.  We're in a new grace period for Cius (at least) where any account can download the software but the full restriction will go back in place some time summer 2012.

Going forward if you start getting banners warning you that you may not be authorized to download software on cisco.com you should pay attention.  The banners will eventually go away and you just won't be allowed to get it at some point.

-Ryan

On Dec 21, 2011, at 3:31 PM, Ed Leatherman wrote:

If you are running 8.5 i think cius is already a device option right? I dont think you really need to reboot in that case, just restart TFTP service.

And yeah, we've been discussing the download/contract thing back and forth, it's a pain. If you contact the email address it lists in the error message they should be able to publish the file for you.


On Wed, Dec 21, 2011 at 2:00 PM, Mike King <me at mpking.com> wrote:
Unless I'm blocked from downloading it because I don't have it on contract.  arrg.


On Wed, Dec 21, 2011 at 1:53 PM, Mike King <me at mpking.com> wrote:
Let me rephrase that question.

Any other COP files I should add? (Incase we get any other demo's)

I've downloading the Android jabber .cop right now


On Wed, Dec 21, 2011 at 1:48 PM, Mike King <me at mpking.com> wrote:
Just got to that point.   argg.

And my manager wanted to play with his new toy "Now!"

Off to schedule a Cluster reboot.

Anything else I should know before I reboot?  I'm on 8.5.1.11900-21.  I've uploaded the .cop file on all Pub/SUBs.


On Wed, Dec 21, 2011 at 1:45 PM, Nate VanMaren <VanMarenNP at ldschurch.org> wrote:
If your system already knows about the CIUS and your just updateing firmware, then just a TFTP restart is ok.  If you’re adding a new device, you have to reboot the whole cluster.

 

-Nate

 

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mike King
Sent: Wednesday, December 21, 2011 10:51 AM
To: Cisco VoIP List


Subject: Re: [cisco-voip] Cius Feedback?

 

Just got my demo cius today. 

 

The COP file doesn't require a reboot or anything (just a TFTP restart)? (Just covering my bases)

 

All I've found is the Wireless LAN deployment guide. http://www.cisco.com/en/US/docs/voice_ip_comm/ccmcd/deploy/9_2_1/english/ciusdply921.pdf

  

Is there anything else for documentation out there?

 

 

On Wed, Dec 21, 2011 at 9:34 AM, Ryan Ratliff <rratliff at cisco.com> wrote:

Right now the external display is a mirror of the main Cius display (720p).  The ability to have a separate display with a larger resolution is highly desired but I don't know if it's been committed to a release yet.

 

-Ryan

 

On Dec 20, 2011, at 9:11 PM, Ki Wi wrote:

 

Hey guys,
Anyone tried the micro-hdmi or the displayport output to monitor ?

What's the maximum resolution it can support for vdi ?

Sent from my iPhone
Pls pardon my fat fingers.

On 20 Dec, 2011, at 5:29 AM, Jeffrey Ollie <jeff at ocjtech.us> wrote:



On Mon, Dec 19, 2011 at 1:21 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

ok - i remember now... the .cnf.xml files are stored in memory, so as long

as you have the correct filename, you can download the file directly from

your TFTP server using the same PumpKIN tool.

 

I had gotten as far as needing the XMLDefault.cnf.xml.  With some

experimentation I found out that I needed to add:

 

<loadInformation593>sipcius.9-2-2-49</loadInformation593>

 

to the XMLDefault.cnf.xml to get the Cius to do the upgrade.

 

--

Jeff Ollie

_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net

https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 



NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.






_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip




-- 
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120104/442a38e4/attachment.html>


More information about the cisco-voip mailing list