[cisco-voip] which soft client to use for smart phones?

Ryan Ratliff rratliff at cisco.com
Thu Jan 5 11:27:05 EST 2012


The old Mobility client was the one that worked with CUMA.  You should be using Jabber.

-Ryan

On Jan 5, 2012, at 11:13 AM, Lelio Fulgenzi wrote:

Thanks Scott. A few questions:

Is Cisco Mobility 8.1 a.k.a. Cisco Jabber? I can't find Mobility 8.1 on the app store, only Jabber.

Do you have it working so the user doesn't have to "think" about VPN, it just works? I don't want users to have to remember to click anyconnect first, then Jabber.

I believe we have mobile license on our ASA, here's a show version output, do you think we're set?



asa5540-annu> sh ver

Cisco Adaptive Security Appliance Software Version 8.0(4)8
Device Manager Version 6.2(3)

Compiled on Wed 15-Oct-08 17:27 by builders
System image file is "disk0:/asa804-8-k8.bin"
Config file at boot was "startup-config"

asa5540-annu up 1 year 356 days

Hardware:   ASA5540, 1024 MB RAM, CPU Pentium 4 2000 MHz
Internal ATA Compact Flash, 64MB
BIOS Flash AT49LW080 @ 0xffe00000, 1024KB

Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
                             Boot microcode   : CN1000-MC-BOOT-2.00
                             SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
                             IPSec microcode  : CNlite-MC-IPSECm-MAIN-2.05
 0: Ext: GigabitEthernet0/0  : address is 0015.c6fa.37fe, irq 9
 1: Ext: GigabitEthernet0/1  : address is 0015.c6fa.37ff, irq 9
 2: Ext: GigabitEthernet0/2  : address is 0015.c6fa.3800, irq 9
 3: Ext: GigabitEthernet0/3  : address is 0015.c6fa.3801, irq 9
 4: Ext: Management0/0       : address is 0015.c6fa.37fd, irq 11
 5: Int: Not used            : irq 11
 6: Int: Not used            : irq 5

Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 200
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled
VPN-3DES-AES                 : Enabled
Security Contexts            : 2
GTP/GPRS                     : Disabled
VPN Peers                    : 5000
WebVPN Peers                 : 500
AnyConnect for Mobile        : Enabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions            : 2

This platform has an ASA 5540 VPN Premium license.

Serial Number: <snip>
Running Activation Key: <snip>
Configuration register is 0x1
Configuration last modified by XXXXXXXX at 13:59:41.886 EDT Wed Nov 2 2011


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)


From: "Scott Voll" <svoll.voip at gmail.com>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Cc: "Cisco VOIP" <cisco-voip at puck.nether.net>
Sent: Thursday, January 5, 2012 11:06:09 AM
Subject: Re: [cisco-voip] which soft client to use for smart phones?

Anyconnect with cisco mobility 8.1 on the iphone.  only played with it a little.  using SNR more.  I'm pretty sure I could support SNR in Production.  Works well.

Cavaets:  anyconnect on mobile devices requires the mobile license on your ASA.
  #2 Anyconnect not supported on majority of droid phones.

Scott

On Thu, Jan 5, 2012 at 7:00 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
i need to start testing some soft clients for smart phones, but i really haven't kept up to speed with the different clients and requirements. what we're looking for is the following:
phone to register over campus wifi
phone to register over third party wifi (using VPN)
phone to move from wifi to 3G and back
to work together with SNR (when wifi and/or 3G data is not available)

i quickly tried the jabber client for iPhone and wasn't too impressed. :( granted, i didn't install any device pack or COP file as instructed, but got it registering with 7.1(5b)SU3. i mean, the client didn't even come to the foreground when i called the extension!

i'm going to do some reading, but was hoping to get a thread going with people's thoughts about the different clients for phones? what are you using? what additional software (e.g. AnyConnect) to get things working?



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120105/f628bfa2/attachment.html>


More information about the cisco-voip mailing list