[cisco-voip] which soft client to use for smart phones?
Jason Aarons (AM)
jason.aarons at dimensiondata.com
Thu Jan 5 12:32:14 EST 2012
Sounds like the better solution is the Application use SSL and not rely on AnyConnect; if AnyConnect is going to require root. Else we could be in for a long stalemate if this is the case. DRM providers don't seem to like root.
Eg Skype for Android
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Thursday, January 05, 2012 11:41 AM
To: Dennis Heim
Cc: Cisco VOIP
Subject: Re: [cisco-voip] which soft client to use for smart phones?
>From what I understand there are some underlying libraries that AnyConnect requires that can only be provided by the device manufacturer. This means outside of Google forcing inclusion via an OS release or the user rooting the device AnyConnect will be supported on more platforms when the manufacturers want it to be. I'd assume the AnyConnect team is trying to get it supported on as many devices as possible but I'm not involved in that project at all so your guess is as good as mine for when support may or may not be expanded.
-Ryan
On Jan 5, 2012, at 11:30 AM, Dennis Heim wrote:
When is android going to get anyconnect? I have a droid 2, and am still out of luck for vpn unless I root the device.
Dennis Heim
Senior Engineer (Unified Communications)
CDW Advanced Technology Services
10610 9th Place
Bellevue, WA 98004
425.310.5299 Single Number Reach (WA)
317.569.4255 Single Number Reach (IN)
317.569.4201 Fax
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>
From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Thursday, January 05, 2012 8:27 AM
To: Lelio Fulgenzi
Cc: Cisco VOIP
Subject: Re: [cisco-voip] which soft client to use for smart phones?
The old Mobility client was the one that worked with CUMA. You should be using Jabber.
-Ryan
On Jan 5, 2012, at 11:13 AM, Lelio Fulgenzi wrote:
Thanks Scott. A few questions:
Is Cisco Mobility 8.1 a.k.a. Cisco Jabber? I can't find Mobility 8.1 on the app store, only Jabber.
Do you have it working so the user doesn't have to "think" about VPN, it just works? I don't want users to have to remember to click anyconnect first, then Jabber.
I believe we have mobile license on our ASA, here's a show version output, do you think we're set?
________________________________
asa5540-annu> sh ver
Cisco Adaptive Security Appliance Software Version 8.0(4)8
Device Manager Version 6.2(3)
Compiled on Wed 15-Oct-08 17:27 by builders
System image file is "disk0:/asa804-8-k8.bin"
Config file at boot was "startup-config"
asa5540-annu up 1 year 356 days
Hardware: ASA5540, 1024 MB RAM, CPU Pentium 4 2000 MHz
Internal ATA Compact Flash, 64MB
BIOS Flash AT49LW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.05
0: Ext: GigabitEthernet0/0 : address is 0015.c6fa.37fe, irq 9
1: Ext: GigabitEthernet0/1 : address is 0015.c6fa.37ff, irq 9
2: Ext: GigabitEthernet0/2 : address is 0015.c6fa.3800, irq 9
3: Ext: GigabitEthernet0/3 : address is 0015.c6fa.3801, irq 9
4: Ext: Management0/0 : address is 0015.c6fa.37fd, irq 11
5: Int: Not used : irq 11
6: Int: Not used : irq 5
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 200
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
VPN Peers : 5000
WebVPN Peers : 500
AnyConnect for Mobile : Enabled
AnyConnect for Linksys phone : Disabled
Advanced Endpoint Assessment : Disabled
UC Proxy Sessions : 2
This platform has an ASA 5540 VPN Premium license.
Serial Number: <snip>
Running Activation Key: <snip>
Configuration register is 0x1
Configuration last modified by XXXXXXXX at 13:59:41.886 EDT Wed Nov 2 2011
________________________________
---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
- LFJ (with apologies to Mr. Popeil)
________________________________
From: "Scott Voll" <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>
Cc: "Cisco VOIP" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Thursday, January 5, 2012 11:06:09 AM
Subject: Re: [cisco-voip] which soft client to use for smart phones?
Anyconnect with cisco mobility 8.1 on the iphone. only played with it a little. using SNR more. I'm pretty sure I could support SNR in Production. Works well.
Cavaets: anyconnect on mobile devices requires the mobile license on your ASA.
#2 Anyconnect not supported on majority of droid phones.
Scott
On Thu, Jan 5, 2012 at 7:00 AM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
i need to start testing some soft clients for smart phones, but i really haven't kept up to speed with the different clients and requirements. what we're looking for is the following:
* phone to register over campus wifi
* phone to register over third party wifi (using VPN)
* phone to move from wifi to 3G and back
* to work together with SNR (when wifi and/or 3G data is not available)
i quickly tried the jabber client for iPhone and wasn't too impressed. :( granted, i didn't install any device pack or COP file as instructed, but got it registering with 7.1(5b)SU3. i mean, the client didn't even come to the foreground when i called the extension!
i'm going to do some reading, but was hoping to get a thread going with people's thoughts about the different clients for phones? what are you using? what additional software (e.g. AnyConnect) to get things working?
---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
- LFJ (with apologies to Mr. Popeil)
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120105/f1ec6950/attachment.html>
More information about the cisco-voip
mailing list