[cisco-voip] which soft client to use for smart phones?

Thu Jan 5 15:44:12 EST 2012

Ice Cream Sandwich (4.0, ICS) is supposed to be enabling the libraries
for native Anyconnect operation.  There will have to be some coding on
the Anyconnect client to use these libraries but it should solve the
rooting problem once those phones become more common and Anyconnect is
updated.  I would make an assumption that Anyconnect will have their
libraries updated by the time ICS hits most phones.

-nick

On Thu, Jan 5, 2012 at 2:39 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
> Install/Admin Guide?
> http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_011.html#task_1CACF6F255684243B6595A691FAE0ED5
>
>
> -Ryan
>
> On Jan 5, 2012, at 2:28 PM, Dennis Heim wrote:
>
> Do you have any links for the secure connect on android option?
>
> Dennis Heim
> Senior Engineer (Unified Communications)
> CDW  Advanced Technology Services
> 10610 9th Place
> Bellevue, WA 98004
>
> 425.310.5299 Single Number Reach (WA)
> 317.569.4255 Single Number Reach (IN)
> 317.569.4201 Fax
> dennis.heim at cdw.com
> cdw.com/content/solutions/unified-communications/
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Thursday, January 05, 2012 11:17 AM
> To: Ryan Ratliff
> Cc: Cisco VOIP
> Subject: Re: [cisco-voip] which soft client to use for smart phones?
>
>
> Ryan, can you comment on what the scenario would be if I use Jabber w/
> AnyConnect?
>
> Is it such that I have to launch them separately or would Jabber launch
> and/or initiate the VPN session automatically?
>
> I'm guessing this is more of a AnyConnect configuration issue, which is
> fine, I can read the notes for that too.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
> ________________________________
> From: "Ryan Ratliff" <rratliff at cisco.com>
> To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Cc: "Cisco VOIP" <cisco-voip at puck.nether.net>, "Scott Voll"
> <svoll.voip at gmail.com>
> Sent: Thursday, January 5, 2012 11:25:48 AM
> Subject: Re: [cisco-voip] which soft client to use for smart phones?
>
> You can go look at the release notes and data sheet for the iPhone Jabber
> client to see what features are out right now.  I can say for sure the
> feature is coming but cannot commit to when it will be out.  If AnyConnect
> on the iPhone won't fly for you and you need secure connect then you need to
> let the PM team for the iPhone mobility clients know (either directly or via
> your account team).  They may be able to give you an ETA as well.
>
> -Ryan
>
> On Jan 5, 2012, at 11:15 AM, Lelio Fulgenzi wrote:
>
>
> will be? you mean it's not there yet? i'm not asking out of malcontent,
> just so i know what i should be concentrating on with the current client and
> when we might expect this feature if not there already.
>
>
> ________________________________
> From: "Ryan Ratliff" <rratliff at cisco.com>
> To: "Scott Voll" <svoll.voip at gmail.com>
> Cc: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Cisco VOIP"
> <cisco-voip at puck.nether.net>
> Sent: Thursday, January 5, 2012 11:10:02 AM
> Subject: Re: [cisco-voip] which soft client to use for smart phones?
>
> The iPhone client will be getting the same secure connect feature that
> Android has so if you are serious about smartphones and voip clients then
> you may want to look at those ASA mobile licenses.
>
> -Ryan
>
> On Jan 5, 2012, at 11:06 AM, Scott Voll wrote:
>
> Anyconnect with cisco mobility 8.1 on the iphone.  only played with it a
> little.  using SNR more.  I'm pretty sure I could support SNR in Production.
>  Works well.
>
> Cavaets:  anyconnect on mobile devices requires the mobile license on your
> ASA.
>   #2 Anyconnect not supported on majority of droid phones.
>
>
> Scott
>
> On Thu, Jan 5, 2012 at 7:00 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> i need to start testing some soft clients for smart phones, but i really
> haven't kept up to speed with the different clients and requirements. what
> we're looking for is the following:
>
> phone to register over campus wifi
> phone to register over third party wifi (using VPN)
> phone to move from wifi to 3G and back
> to work together with SNR (when wifi and/or 3G data is not available)
>
>
> i quickly tried the jabber client for iPhone and wasn't too impressed. :(
> granted, i didn't install any device pack or COP file as instructed, but got
> it registering with 7.1(5b)SU3. i mean, the client didn't even come to the
> foreground when i called the extension!
>
> i'm going to do some reading, but was hoping to get a thread going with
> people's thoughts about the different clients for phones? what are you
> using? what additional software (e.g. AnyConnect) to get things working?
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>