[cisco-voip] media resource

[Roger Wiklund]

I'm not 100% clear how resources are selected if all are in the same
MRG, but you can try this:

Create a hardware CFB and allow G.729 only. Put that resoure in HW-CFB-MRG
Then put the software CFB in SW-CFB-MRG.

Create a MRGL and put HW-CFB-MRG on top, then SW-CFB-MRG after it.
(This is an ordered list)
That way it should always try with the hardware first, fine for G.729
calls but wont work for G.711 so it _should_ try the second MRG
(software) then.

I'm not sure if it just fails for a G.711 call or if it will try with
the second resource, but give it a try.

/Roger

On Thu, Jan 5, 2012 at 8:58 AM, Shaihan Jaffrey <schaehan at gmail.com> wrote:
> Any suggestions on below email.
>
>
> On Wed, Jan 4, 2012 at 7:38 PM, Shaihan Jaffrey <schaehan at gmail.com> wrote:
>>
>> hi,
>> What is the best way to keep media resouces in media resource list.
>>
>> I want hardware conference bridge to be used only for G.729 calls, for all
>> other conference calls G.711 i want to use software conference bridge. How
>> to accomplish this?
>>
>>
>>
>> Regards
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>