[cisco-voip] installing multiple COP files - together or separately with multiple reboots?

Lelio Fulgenzi lelio at uoguelph.ca
Fri Jan 6 11:06:29 EST 2012


definitely adding new devices, so a reboot is necessary. 

i'm just wondering if i can wait to reboot the server after i install multiple COP files. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Matthew Loraditch" <MLoraditch at heliontechnologies.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>, "Cisco VOIP" <cisco-voip at puck.nether.net> 
Sent: Friday, January 6, 2012 10:59:22 AM 
Subject: RE: [cisco-voip] installing multiple COP files - together or separately with multiple reboots? 




If it’s just firmware updates and not a device pack that adds a new device, reboots should not be necessary. 

I’m not sure about the dialing rules as I have not used them. 






Matthew Loraditch, CCVP, CCNA, CCDA 
1965 Greenspring Drive 

Timonium, MD 21093 
support at heliontechnologies.com 
(p) (410) 252-8830 
(F) (443) 541-1593 

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance! 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Friday, January 06, 2012 10:56 AM 
To: Cisco VOIP 
Subject: [cisco-voip] installing multiple COP files - together or separately with multiple reboots? 




It looks like I will have to install multiple COP files in order to get some updates I need to test out new phone models and the Jabber clients. 

Do I need to install these separately with cluster reboots in between or can I install a whack load, i.e. all jabber COP files, v7.1 device pack, CUCIMOC dialing rules COP file, on each server and then restart? 

I have read through the device pack readme and it doesn't say anything about having to do it separately. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120106/8ead8198/attachment.html>


More information about the cisco-voip mailing list