[cisco-voip] SNR with SIP Trunk on CUBE SP

[Joel Perez]

Hi Duy,

I've ran into similar issues and usually  and i have solved it in my cases
with the following:


voice class sip-profiles 100
request INVITE sip-header Remote-Party-ID remove
request INVITE sip-header Remote-Party-ID remove
request INVITE sip-header Diversion add "Diversion: <sip:authorized
DID at ipof outbound interface of cube>"

Dial-peer voice 1 voip
description "to sip provider"
voice-class sip profiles 100

Hope this helps,

Joel P

On Tue, Jan 10, 2012 at 11:26 AM, ccieid1ot <ccieid1ot at gmail.com> wrote:

> Hi guys,
>
> We have an issue of SNR not able to complete the calls to remote
> destination since the SIP Provider is authenticating on DIDs.  The
> customer's CUCM is connected to our CUBE SP  (ASR 1000) and we're connected
> to our SIP Provider.  Example:  I call into the phone 4242862304, it has
> SNR to 13102832382, but call fails to the Remote Destination because in
> the SIP message it shows my number as the calling party.
>
>
>
>
> CUCM 8.6.1 > CUBE SP IOS 15.x > SIP Provider
>
>
>
>
> We have tried setting these options in the SIP Trunk settings of CUCM.
>
> Outbound Calls
> Last Redirect Number (External)
>
> check Redirecting Diversion Header Deliver - Outbound
>
>
> I have a TAC case open but they're more confused than I am.  I have also
> attached the debug.
>
> Maybe I'm missing some commands on the CUBE SP to allow Diversion
> Headers?  Not sure, I'm new to CUBE SP.
> --
> duy
> CCIE #27737 Voice
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120110/364e89d7/attachment.html>