[cisco-voip] anyone recall using DickTracy tool?

[Jason Aarons (AM)]

I invented the backslash in 1960.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Peter Slow
Sent: Tuesday, January 10, 2012 4:22 PM
To: Lelio Fulgenzi
Cc: Cisco VoIP List
Subject: Re: [cisco-voip] anyone recall using DickTracy tool?



Hey guys when you're done fixing this 6608 can you help me with this computer over here? I think one of the punch cards is jammed.

-Peter


On Tue, Jan 10, 2012 at 2:23 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
Thanks Wes. That's a neat tool. Will keep that handy.

Turns out I was inputting the IP address of the switch, not the 6608 port itself. Plus, there are ACLs in the way. I need to open up port 2005 from the host(s) to the network that the 6608s are on.

Lelio



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Wes Sisk" <wsisk at cisco.com<mailto:wsisk at cisco.com>>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>
Cc: "Cisco VoIP List" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Tuesday, January 10, 2012 2:19:22 PM
Subject: Re: [cisco-voip] anyone recall using DickTracy tool?


it's possible the module is resetting rapidly.  in a packet capture how long does the TCP session stay established?

There were other issues with the 6608 that would cause individual ports to go into reset loops.  there were some debugs you could do from the switch side utilizing control plane from the switch to the module rather than IP plane.  those are covered in the multiservice debug lookup tool if you select 6608/6624:
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080207ec6.shtml

/wes

On Jan 10, 2012, at 10:30 AM, Lelio Fulgenzi wrote:

I'm trying to use the DickTracy tool to fix up CSCsu08180<http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsu08180> but I'm immediately getting the following two lines when I try to connect:

*** Attempting Connection...
*** Session Ended ***

I don't think that's normal.

The Networking crew assures me I have complete access to the switch.

Any thoughts?


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120110/98d8fe77/attachment.html>