[cisco-voip] CM Cancel Call Waiting feature

[gr11]

Have been doing it only for per device due to few people requiring this, as
iDivert is better. If only needed for few devices you can cancel call
waiting from directory number page under - "Multiple Call/Call Waiting
Settings on Device". Set the "Busy trigger" to 1.


On Wed, Jan 11, 2012 at 11:33 PM, Ovidiu Popa <ovi.popa at gmail.com> wrote:

> Hello
>
> Anyone have a description for the "Cancel Call Waiting" feature in CM?
>
> Other than these two paragraphs in the 8.0 system guide I can't seem to
> find any information on this ...
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmsys/a08ipph.html#wp1219288
>
> Thanks.
>
> Regards,
> Ovidiu
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120112/9c0cc1a2/attachment.html>