[cisco-voip] inbound calling yes, outbound calling no. reorder tone if possible

[Paul]

I thought PLAR was inbound only?

Couldn't you just set up PLAR for inbound and then have no outbound dial-peers referencing the port? If you only have connection plar XYZ for inbound and then don't have any outbound dial-peers referencing port x/y wouldn't that fly?


________________________________
From: Lelio Fulgenzi <lelio at uoguelph.ca>
To: Cisco VOIP <cisco-voip at puck.nether.net> 
Sent: Monday, January 16, 2012 9:30 AM
Subject: [cisco-voip] inbound calling yes, outbound calling no. reorder tone if possible



I need to set up an analog line that has inbound calling, but outbound calling is disabled. Easy enough with partitions and search spaces. However, I need to somehow feed an error tone back to the device when it goes off hook when trying to dial out in order for it to use a different path.

I was thinking of setting it up as a plar which would dial a non-existent number or something, but I can't remember if that would give me the annunciator or not.

I would also have to replicate this during SRST.

Thoughts?



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip