[cisco-voip] Busy-out a POTS line in a hunt group??

[Bill Riley]

Busy-out forced command under the voice-port. Makes it appear to the TELCO
as the voice-port is busy with a call.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tim Reimers
Sent: Tuesday, January 17, 2012 9:39 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Busy-out a POTS line in a hunt group??

 

hi all -

 

Is there a way to busy out a single POTS line in a hunt group from the
voice-port side of things?

 

I'd rather not go through the lengthy process to get the carrier (AT&T) to
do it on the back end due to the delays, and the fact that I may

dynamically want to turn up and turn down various members as I configure
more equipment to receive the calls.

 

Game plan is to ensure that only 2, or 3, or 4 members of the group answer,
and that it sees a given POTS line as inactive or busy and just rolls on to
the next member, and back to the top of the hunt group after 'hitting
bottom'

 

thanks, Tim

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120117/e97ecca7/attachment.html>