[cisco-voip] CUCM - separating management traffic

[Matthew Saskin]

You can't.  Virtual or physical, CUCM only operates using a single
interface and single IP address.  Closest you're going to get is firewall
rules to disallow certain access based on source, and that may not even
work as things like authentication URL's are on the same IP/port on the
CUCM - you'd have to do some application layer filtering of URL's.


On Wed, Jan 18, 2012 at 11:21 AM, FrogOnDSCP46EF <ciscoboy2006 at gmail.com>wrote:

> Have anyone figured out yet how to separate CUCM management  in VMware or
> physical deployment?
>
> It's kind of weird, Cisco's all deployment templates are still putting
> mgmt and traffic packets on the same eth0 interface.
>
> I bet this is in Cisco's todo list.
>
> thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120118/07716b6a/attachment.html>