[cisco-voip] CUBE not requesting codec... call fails... need to force SDP in invite...

[Nick Matthews]

It's just an ISR, so the deployment is up to you.  Usually depends on
the scale.  If it's a pilot, whatever you have around.  It's really
what else you want to manage on your side and if you'll get confused
with so many things on one router.  When you get higher towards the
CPU capacity of the box in sessions you'll want to have a mostly
dedicated box to prevent other things from hogging the CPU.  There
really isn't a best practice but many organizations decide to put it
on dedicated hardware to keep it simple.

-nick

On Wed, Jan 25, 2012 at 9:43 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> Speaking of CUBE, just wondering what the common practice is for physical
> deployment. We have two routers which will eventually house our MGCP
> gateways in HQ and one router at each of our remote sites, again, MGCP.
>
> If I want to deploy CUBE, is it usually installed separately from the main
> campus router?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Roger Wiklund" <roger.wiklund at gmail.com>
> To: "Jonathan Charles" <jonvoip at gmail.com>
> Cc: "Cisco VOIP" <cisco-voip at puck.nether.net>
> Sent: Wednesday, January 25, 2012 3:27:19 AM
> Subject: Re: [cisco-voip] CUBE not requesting codec... call fails... need to
> force SDP in invite...
>
>
> On Wed, Jan 25, 2012 at 3:54 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
>> Because, as far as I can tell, Cisco does not support SIP to SIP on the
>> CUBE... and it doesn't work.
>>
>> You need to be H.323 to the CUBE, then SIP to the provider.
>
> Hi,
>
> SIP-SIP is definitely the way to go, should be easier on the CPU to
> not have to convert between the two, and also easier to troubleshoot.
>
> I'm running SIP-SIP with DO-EO and RTP flow-around.
>
> I wrote some notes about it that may be useful (even if you are not
> running flow-around)
>
> http://wiklunds.wordpress.com/2012/01/02/sip-delayed-offer-to-early-offer-with-rtp-flow-around-support-in-cube-8-6/
>
> Regards
> Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>