[cisco-voip] Automatic response - CUCM 8

[Roger Wiklund]

You can upload a customized announcement.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b04announce.pdf

I would not recommend this setup to get a prompt played, but if you
are desperate I guess there is some way of doing it.

/Roger

On Mon, Jan 30, 2012 at 3:18 PM, Bill Riley <bill at hitechconnection.net> wrote:
> Is that even supported? Won't it get overwritten during any upgrades?
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Roger Wiklund
> Sent: Monday, January 30, 2012 8:15 AM
> To: Isamar Maia
> Cc: Cisco VOIP
> Subject: Re: [cisco-voip] Automatic response - CUCM 8
>
>> It's possible but very limited, you would have to for example send the
>> call to a translation-pattern with block this pattern, with reason
>> "precedence level exceeded" and then replace:
>>
>> MLPP-PALA_00119 Precedence access limitation has prevented the
>> completion of your call. Please hang up and try again. This is a
>> recording
>>
>> with your custom recording. But this will be global. I guess if you
>
> Sorry I think that's the wrong announcement, not 100% sure which one it is
> but you get the idea.
>
> /Roger
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>