[cisco-voip] 3845 power supply sanity check..

[Ed Leatherman]

I think that's new on the 3900 platform.. on the 3945 i have, it lists
the non-PoE power supplies also:

NAME: "C3900 AC Power Supply 1", DESCR: "C3900 AC Power Supply 1"
PID: PWR-3900-AC       , VID: V03 , SN:

NAME: "C3900 AC Power Supply 2", DESCR: "C3900 AC Power Supply 2"
PID: PWR-3900-AC       , VID: V03, SN:

None of my 3800's list power supply info in the show inventory output
unfortunately =(

On Mon, Jan 30, 2012 at 4:09 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> show inventory I believe is what you want:
>
> from my 3945:
>
> NAME: "C3900 AC-POE Power Supply 1", DESCR: "C3900 AC-POE Power Supply 1"
> PID: PWR-3900-POE      , VID: V01 , SN: <snip>
>
> NAME: "C3900 AC-POE Power Supply 2", DESCR: "C3900 AC-POE Power Supply 2"
> PID: PWR-3900-POE      , VID: V01 , SN: <snip>
>
> unfortunately, i don't have POE power supplies in my 3845. when i do a show
> inventory, it doesn't show power supplies at all. weird.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ________________________________
> From: "Ed Leatherman" <ealeatherman at gmail.com>
> To: "Cisco VOIP" <cisco-voip at puck.nether.net>
> Sent: Monday, January 30, 2012 3:59:50 PM
>
> Subject: [cisco-voip] 3845 power supply sanity check..
>
> Hello,
>
> Anyone running a 3845 with the "AC-IP" power supply? If so, what is
> the output of show environment, next to "Type:"?
>
> I'm trying to determine what power supplies are in a remote campus
> router, show env output says:
> ftc-edge#sh environment
>
>  SYS PS1 is present.
>         Fan status: Normal
>         Input Voltage status: Normal
>         DC Output Voltage status: Normal
>         Type: AC
>         Thermal status: Normal
>
>  SYS PS2 is present.
>         Fan status: Normal
>         Input Voltage status: Normal
>         DC Output Voltage status: Normal
>         Type: AC
>         Thermal status: Normal
>
>  AUX(-48V) PS1 is absent.
>
>  AUX(-48V) PS2 is present.
>         Status: Normal
> Compliance Mode: IEEE 802.af compliant
>
>
> Trying to verify that these power supplies are NOT AC-IP, if that is
> possible to tell. I'm having trouble with PoE on a 48 port PoE
> Etherswitch module, and TAC is telling me its because the power
> supplies are not the AC-IP variety, and point to this output. only
> about 10-12 PoE devices on the switch (7961's).
>
> I'm skeptical because the router was ordered with AC-IP per the
> packing slip I have from 2007. Also, PS2 is saying its 802.af
> compliant.. that's not to say there was a shipping error and I missed
> it when I assembled the device though.
>
>
>
> --
> Ed Leatherman
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip



-- 
Ed Leatherman