[cisco-voip] separating channels in use on 3945 via SNMP

[Nate VanMaren]

On my 3845s that have 12 PRIs, I found that because of the slot/port/subport instead of the slot/port that the SNMP MIB was written for, it was impossible to get it via SNMP.  So we screen scrape CLI to get what I want.



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, July 19, 2012 12:11 PM
To: Cisco VOIP
Subject: [cisco-voip] separating channels in use on 3945 via SNMP


Is anyone aware of an OID that provides channels in use on separate spans?

I have PRIs that I used to connect to a PBX and I want to track them separately from the channels going to the PSTN.



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)



 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120719/4bc4cf7f/attachment.html>