[cisco-voip] Download CM version 8.6?

[Heim, Dennis]

If you make a non-bootable image, bootable, and you have to get support, you better freshen up that resume. The fact is tac can determine if a hacked bootloader was used. There are numerous documented cases where a hacked boot loader causes entire enviroments to be rebuilt. Therefore, I would only do this is a lab environment.

Dennis Heim
Sr. UC Engineer
World Wide Technology
Office: 314.212.1814
Email: dennis.heim at wwt.com<mailto:dennis.heim at wwt.com>
www.wwt.com<http://www.wwt.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Karim Jiwani
Sent: Friday, July 20, 2012 12:01 AM
To: cisco-voip at puck.nether.net; svoll.voip at gmail.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Download CM version 8.6?

Hi,

You can download any version of CM from cisco site and CCO account is needed. After download you can burn ISO to physical media (DVD) or you can directly mount iso if using VMware. The ISO and/or DVD is not bootable and only can be used for up-gradation of existing CUCM. Bootable media comes with purchase of new CUCM servers only.

There are unofficial ways that you can make 8.6 iso bootable at your own risk and use it on VMware. You will need following to things to make iso bootable.

1. Cucm Iso.
2. Redhat linux v5 (32 bit) iso
3. Ultra ISO software (or any other iso software you prefer)

Open the redhat iso in ultra iso and extract the boot file and save it. Now load the cucm iso in ultra iso. Insert the save bootable file in cucm iso and save the cucm iso. Now mount or burn the iso and make a clean install of cucm.





From: "Norton, Mike" <mikenorton at pwsd76.ab.ca<mailto:mikenorton at pwsd76.ab.ca>>
To: Scott Voll <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>>, "cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>"
   <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: Re: [cisco-voip] Download CM version 8.6?
Message-ID:
   <2C4107B204F8E74EB0A63EF59B0F97023AB8F8 at PWSDEXCHANGE06.pwsb33.ab.ca<mailto:2C4107B204F8E74EB0A63EF59B0F97023AB8F8 at PWSDEXCHANGE06.pwsb33.ab.ca>>
Content-Type: text/plain; charset="us-ascii"

The one you want is on the Cisco site under
Downloads Home --> Products --> Voice and Unified Communications --> IP Telephony --> Unified Communications Platform --> Cisco Unified Communications Manager (CallManager) --> Cisco Unified Communications Manager Version 8.6 --> Unified Communications Manager / Cisco Unity Connection Updates.

Not bootable but other than that it is the full thing. If you need bootable then you have to use PUT. The one I got from PUT recently was 8.6(2a). For 8.6(2a)SU1 you need to download from the above.

-mn


From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: July-18-12 8:22 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Download CM version 8.6?

Can you download CM or is it a PUT physical media only?  is the recovery download the full ISO?

TIA

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120720/acdd54d7/attachment.html>