[cisco-voip] PRI channels not available

Gregory Wenzel gwenzit at gmail.com
Mon Jul 30 20:05:06 EDT 2012


if you do a show inventory how many DSP's show up?

On Fri, Jul 27, 2012 at 2:31 PM, Joseph Mays <mays at win.net> wrote:

> **
> I have an IAD2400 with a channel group using 22 channels on one interface.
>
> Cisco IOS Software, 2400 Software (C2400-IS-M), Version 12.3(11)T10,
> RELEASE SOFTWARE (fc4)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Fri 03-Mar-06 17:49 by dchih
>
> ROM: System Bootstrap, Version 12.3(7r)T2, RELEASE SOFTWARE (fc1)
>
> glassdoctor uptime is 6 days, 7 hours, 5 minutes
> System returned to ROM by power-on
> System image file is "flash:current.bin"
>
> Cisco IAD2431 (R527x) processor (revision 4.1) with 119808K/11264K bytes
> of memory.
> Processor board ID FHK1046F3JE
> R527x CPU at 225MHz, Implementation 40, Rev 3.1
> 1 On-Board Eight FXS Analog Voice Module V2.1
> 1 FastEthernet interface
> 2 Serial interfaces
> 2 Channelized T1/PRI ports
> DRAM configuration is 64 bits wide with parity disabled.
> 63K bytes of non-volatile configuration memory.
> System fpga version is 250027
> System readonly fpga version is 250025
> Option for system fpga is 'system'.
> 62720K bytes of ATA System CompactFlash (Read/Write)
> 0K bytes of ATA Slot0 CompactFlash (Read/Write)
>
> Configuration register is 0x2102
>
> I want to use the remaining 2 channels for a pri-group for, essentially,
> one analog voice line.
>
> controller T1 0/0
>  framing esf
>  linecode b8zs
>  channel-group 0 timeslots 1-22 speed 64
> But it won't let me enter the pri-group definition under the controller.
> Whenever I try it says no resources are available.
>
> glassdoctor(config-controller)#pri-group timeslots 23-24
> %Channel-group already created. No more resource
> glassdoctor(config-controller)#
> I have done this before. Why would it not be allowing me to create the
> pri-group now?
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Greg Wenzel, CCNP Voice
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120730/66c1fba0/attachment.html>


More information about the cisco-voip mailing list