[cisco-voip] SIP trunk fax troubleshooting

[Divin John]

Do you have debugs from the CUBE? Are MTPs involved in the call flow?

From:  Lelio Fulgenzi <lelio at uoguelph.ca>
Date:  Monday 30 July 2012 10:22 PM
To:  Robert Kulagowski <rkulagow at gmail.com>
Cc:  Cisco VOIP <cisco-voip at puck.nether.net>
Subject:  Re: [cisco-voip] SIP trunk fax troubleshooting

I recall being at a Live session whereby they said just that, if you're
still doing FAXing without some sort of FAX server, keep using a PRI for
that. By "they", I mean David Hanes, Gonzalo Salgueiro, the writers of the
Modem/FAX book 
<http://www.ciscopress.com/bookstore/product.asp?isbn=1587052695>  who were
doing the session. Or at least I'm pretty sure about that anyways.

It's one of the (many) reasons I've steered away from SIP for now.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)



From: "Robert Kulagowski" <rkulagow at gmail.com>
To: "Cisco VOIP" <cisco-voip at puck.nether.net>
Sent: Monday, July 30, 2012 12:43:18 PM
Subject: [cisco-voip] SIP trunk fax troubleshooting

Outbound faxes aren't working.

Fax machine is connected to a VGC -> CUCM -> SIP trunk -> CUBE ->
bandwidth.com

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version
15.1(4)M2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Mon 26-Sep-11 17:37 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)

voice service voip
 ip address trusted list
  ipv4 216.82.224.202
  ipv4 216.82.225.202
  ipv4 10.255.23.7
  ipv4 10.255.1.21
  ipv4 10.255.29.20
 address-hiding
 mode border-element
 allow-connections sip to sip
 no supplementary-service sip moved-temporarily
 no supplementary-service sip refer
 fax protocol pass-through g711ulaw
 sip
  header-passing
  error-passthru
  no update-callerid
  early-offer forced
  midcall-signaling passthru
  privacy-policy passthru
  g729 annexb-all

dial-peer voice 10000 voip
 description Outbound SIP to Bandwidth.com
 translation-profile outgoing SIP-OUT
 destination-pattern 8T
 session protocol sipv2
 session target ipv4:216.82.224.202
 voice-class sip dtmf-relay force rtp-nte
 dtmf-relay rtp-nte
 codec g711ulaw
 fax-relay ecm disable
 ip qos dscp cs5 media
 ip qos dscp cs4 signaling
 clid restrict
 no vad

The CUBE book makes it seem like it should "just work".

I've also tried:

dial-peer voice 10000 voip
 description Outbound SIP to Bandwidth.com
 translation-profile outgoing SIP-OUT
 preference 1
 destination-pattern 8T
 session protocol sipv2
 session target ipv4:216.82.224.202
 voice-class sip dtmf-relay force rtp-nte
 dtmf-relay rtp-nte
 codec g711ulaw
 fax-relay ecm disable
 fax rate 9600
 fax protocol pass-through g711ulaw
 ip qos dscp cs5 media
 ip qos dscp cs4 signaling
 clid restrict
 no vad

No joy there either.

Seems like fax and modem are perpetual issues with SIP trunking from
what I can see in the archives? The easiest would be to just continue
to send fax to PRI / analogs, but where's the fun in that?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________ cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120731/b305985a/attachment.html>